Spv120 is a stackable, load sensing, pre-compensated proportional valve provides flow control independent of load pressure from 5 to 130lpm. 

Spv120 offers precise control and efficiency for a wide range of applications from mobile cranes, fire engines, agricultural machineries, aerial platforms & lifts, concrete pumps to mining and drilling machines. energy saving load sensing technology increase efficiency. 

Modular structure enables unlimited configurations to the user with less effort. 

Thanks to the careful design engineering, SPV120 offers advanced customized control with shock valves, lsa/lsb pressure relief valves, spool stoke limiters, precise spool adjustents specific for the application requirements. the valve combines advanced abilities through various actutator options: manual, hydraulic, proportional, pwm, voltage and canbus proportional control for open and closed loop systems. 

With pressure compensators in each section, actuators are compensated and maintained a constant pressure drop against changes in load. 

As standard, we send 80 l/min (21 US gpm)

You can change it to:

40 l/min (11 US pm)

65 l/min (17 US gpm)

100 l/min (26 US gpm)

125 l/min (33 US gpm)

Standard Threads:

Port P : 3/4 " BSP

Port A/B : 1/2 " BSP

Port T : 3/4n " BSP

Port LSA/LSB : 1/4 "BSP

Port  PM/EHP/EHT :  1/4 "BSP

Construction:

Technical specifications:

Working conditions:

Joystick 

Controllers for proportional solenoid valves. Just mount it on the operator panel, connect power supply and proportional solenoid, then adjust the current using the potentiometer on board.
VPP3 is available for single solenoid and for double solenoid valves.
Features
- adjustable minimum/maximum current for each directions (A+B);
- adjustable rise/fall timeramp up to 25 seconds (step 0.1s);
- adjustable PWM frequency from 50 to 300 Hz;
- output curve shape: linear or parabolic (selectable);
- no. 2 multi purpose pins. Each one can be programmed to work as:
 digital input (to enable or block outputs, speed selection).
 digital output (dump valve, directional output, output over a threshold).
Factory preset
- min/max current: 500/1700 mA [ver. 12V] - 250/850 mA [ver. 24V]
- PWM frequency: 100 Hz
- OUT2 as DV output active when a PWM output is commanded
- OUT1 as FAULT output (positive = normal working);
All working parameters are adjustable through a serial port and the
Windows® SepSim program using a special serial port adapter (AISR).

Specifications :

Power Supply Voltage : 10 ÷ 30 Vdc

Working Temperature Range : -40 ÷ +70 °C

PWM Output min/max current range: 50 ÷ 2500 mA 

Digital inputs thresholds: VLOW-VHIGH: 3V VHIGH-VLOW: 2V

PWM available frequencies: 50, 60, 70, 85, 100, 125, 150, 200, 250, 300 Hz

Digital outputs maximum current : 2000 mA each

External connections : Cable L=20 cm with Deutsch DT04-8 connector

Ingress Protection Rating : VPP3-S: IP64 (optional IP67) / VPP3-D: IP67

EMC compatibility : ISO EN 14982:2009