SLOPE INCLINATION SENSOR for TORQUE LIMITER
Technical specifications
Working voltage: 10 ÷ 30 VDC
Commutation angle: 5°
Max current: 1A(resisitive)
Working room temperature: - 20 ÷ + 80 °C
Fitting adjustment: ± 16°
Dimensions: 80 x 125 x 33mm
Weight: 220 g
Clamping bracket: 1.8 mm thickness galvanized iron plate 12μm resistant to salty smoke meeting UNI ISO 4520 requirements
Sensor: incapsulated into epoxy resin
Connector: DIN 43650 type with 3 poles + ground
Protection level: IP65 (IP67 on request)
Fitting
The contact is open or closed depending on the inclination of device. Mount on vertical plane. Max. deviation from vertical allowed is 5°.The sensor with electric contact can be mounted on bracket with left or right output. Turn always the connector with bottom output. See pictures.
Disassembly and scrapping
The slope sensor contains mercury (Hg). In case of product disassembly and/or scrapping, it is necessary to contact the installer or an authorized dismantler. The same will correctly dispose of mercury following laws in force.