SLOPE INCLINATION SENSOR for TORQUE LIMITER
Technical specifications:
Commutation angle: 5°
Max current: 1A(resisitive)
Working room temperature: - 20 ÷ + 80 °C
Fitting adjustment: ± 16°
Dimensions: 80 x 125 x 33mm
Weight: 220 g
Clamping bracket: 1.8 mm thickness galvanized iron plate 12μm resistant to salty smoke meeting UNI ISO 4520 requirements
Sensor: incapsulated into epoxy resin
Connector: DIN 43650 type with 3 poles + ground
Protection level: IP65 (IP67 on request)
Fitting:
The device gives a positive voltage signal on one of the connector poles depending on the inclination and the corresponding LED switches on. Mount on vertical plane. Max. deviation from vertical allowed is 5°.The sensor with electric contact can be mounted on bracket with left or right output. Turn always the connector with bottom output. See pictures.
Disassembly and scrapping:
The slope sensor contains mercury (Hg). In case of product disassembly and/or scrapping, it is necessary to contact the installer or an authorized dismantler. The same will correctly dispose of mercury following laws in force.