You can find Service manual for scanreco G2B and G3B
General information
• Remotely controlled cranes may only be operated by qualified personnel. The driver must be aware of the contents of chapter 4 “Safety regulations and
Operating instructions” available in the Intruction Manual before operation is started. Serious accidents may occur if these instructions are not followed.
• To protect the portable control unit from damage and for safety reasons, the control unit must be kept in a locked cabin
• Follow the instructions given in the crane handbook regarding moving the crane from its parking position, the best arm positioning while loads are being handled and parking of the crane.
• Due to the unlimited variety of cranes, machines, objects, vehicles and equipment on which the remote control system are used, and the numerous standards which are frequently the subject of varying interpretation, it is impossible for the personnel at Scanreco to provide expert advice regarding the suitability of a given remote control for a specific application. It is the responsibility of the purchaser to determine the suitability of any Scanreco remote control product for an intended application and to insure that it is installed and guarded in accordance with all country, federal, state, local, and private safety and health regulation, codes, standards and Scanreco recommendation (this manual). If the Scanreco RC 400 G2B/G3B will be used in a safety critical application, the customer / driver must undertake appropriate testing and evaluation to prevent injury to the ultimate user. Scanreco does not take responsibility for any damage or injury.
• Unauthorized tampering with a Scanreco remote control system automatically invalidates guarantee. This manual is intended as a complement to the crane / machine instruction book and covers the Scanreco RC 400 G2B/G3B Remote Control System.
The Scanreco RC 400 G2B/G3B offers the driver an extremely advanced remote control system with speed, precision, control and maximum safety. In order to ensure your safety and the safety of your crane / machine you should study and learn these instructions. This will enable you to quickly familiarise yourself with your new remote control system and how to utilise it.