Hydraulic, sectional valve Walvoil DPX 100 with compensation, full proportional

Technical specifications of default configuration:

Inlet section: 32GPM 120l/min - Pmax 300 bar 4351psi   Power supply port: 3/4" BPS, tank return port: 3/4" BPS

1st 60l/min 16GPM Partially Open in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

2nd 60 l/min 16GPM Partially Open in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

3rd 40l/min 10GPM Partially Open in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

4th 60l/min 16GPM Closed in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

5th 60 l/min 16GPM Closed in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

6th 40 l/min 10GPM Closed in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

7th 40 l/min 10GPM Closed in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

8th 80/min 21GPM Partially Open in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

9th 80/min 21GPM Partially Open in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

10th 80/min 21GPM Partially Open in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

11th 80/min 21GPM Partially Open in neutral position, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever

Outlet section: with the possibility of combining valves, with bleed valve (LS relief), with pressure reducing valve. Control connection "V" and drainage connection "L" closed. Side connections "T1", "P1", "LS1" closed. DBV fixed and sealed to 175 bar at 90L/min.

Scanreco G2B Mini 2 Joysticks

- 2 proportional joysticks

- Stop function according to EN ISO 13849-1 Cat. 3, PL e

- Various toggle switches, buttons and rotary switches

- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)

- Operating range > 100 m / > ~330 ft.

- Degree of protection: IP65

- Operating temperature: -20°C to +70°C / ~-4°F to +160°F

- Cable control: standard length 10 meters / ~33 ft.

- G2B Receiver PWM 12 or 24 VDC power supply

- Choice of radio or cable control

- 8 bi-directional proportional outputs

- All analog outputs are programmable for final setting of speeds

- 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output)

- A DV output to control the dump valve

- Radio communication in the ISM band using frequency hopping technology

- Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available).

- Programmable logic with block, soak, decelerate, ramp functions and much more

- Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required.

- Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display)

The kit works with a lot of application. For sure please contact with us.