Sectional directional control valve Galtech Q45 flow 60 l/min 16 gpm   

Electric solenoid 12V + levers

Valve controled electrically and by additional lever.

The levers on the spring that helps back to the vertical position

Perfect for machines and vehicles which require the ability to control distributor of two places: electrically from the cabin and levers standing directly on the valve, as for example. HDS-edged and cranes.

Lever three positions

Position the first neutral (lever positioned vertically piston cylinder stands - oil goes to overflow

Position the second working (lever set to slant forward) piston cylinder extends.

Position the third working (lever set to slant backward) piston cylinder retracts.

Threads inside in valve:

Power 1/2 ''

Return: 1/2 ''

Connecting sections: 1/2 ''

An overflow valve:

Factory set at 175Bar = 2538psi

The possibility of self-regulation, a full rotation change of 30Bar = 435psi.

Allowable pressure:

Flow: 250 bar = 3626psi

Return: 50Bar = 725psi

On the sections: 300bar = 4351psi

Permitted the ambient temperature:

-40 ° C to + 60 ° C

Permissible oil temperature:

-15 ° C to + 80 ° C

Oil type:

Hydraulic oil based on mineral oil

Cylinder Spool type, for request we can build valve with ''D spool'' motor type.

The Powerbeyond bushing is a device that allows the activation of an additional flow-limited valve downstream of another valve, by changing the function of the 'T' port to a pressure port. This solution provides power to the downstream valve from the port normally intended for the 'tank', allowing the transfer of high pressure. To use this functionality, it is also necessary to remove the cap from the top of the valve block, allowing it to be used as a reservoir connection.