- Secured Payment
- Fast Delivery
- 24/7 Tech Support
GALTECH 4 SECTIONS DIRECTIONAL CONTROL VALVE Q45 60 L/MIN 16 GPM ELECTRIC SOLENOID 12V + LEVERS
- Touch on Image to show all photos
Max flow: 60l/min
Solenoids: 12V
Informations
Monoblock directional control valve Galtech Q45 60l/min 12 v 4 sections
Electromagnet technical features:
Magnet connection Type DIN 43650 (vers. A)
Protection type IP65
Coil insulation class H Supply voltage 12V D.C.
Maximum voltage tolerance ±10%
Absorbed power supply 58W
Maximum utilization ratio 100%
Directional control valve characteristics (60 l/min)
Max. working pressure 275 bar (3988 PSI)
Max. back outlet pressure 25 bar (3363 PSI)
Emergency operation or in case of power failure With lever
Max. spool leakage of A and B ports to T port at 1450 PSI with viscosity 35 mm2/s 5 cm3/min
Slider: 103 cylinder
Flow [l / min]: 60
Max pressure [bar]: 350 = 5076psi
Overflow [bar]: 150 = 2175psi
Power connection [BSP]: 3/8 ”
Receiver connection [BSP]: 1/2 "
Tank connection [BSP]: 1/2 "
Cylinder Spool type, for request we can build valve with ''D spool'' motor type.
The Powerbeyond bushing is a device that allows the activation of an additional flow-limited valve downstream of another valve, by changing the function of the 'T' port to a pressure port. This solution provides power to the downstream valve from the port normally intended for the 'tank', allowing the transfer of high pressure. To use this functionality, it is also necessary to remove the cap from the top of the valve block, allowing it to be used as a reservoir connection.
Volume discounts
Quantity | Unit discount | You Save |
---|---|---|
5 | 10% | $733 |
10 | 15% | $2,198 |
20 | 25% | $7,325 |