Monoblock Galtech  Q45  60l 4 sections 12 v 

Electromagnet technical features:

Magnet connection Type DIN 43650 (vers. A) 

Protection type IP65 

Coil insulation class H Supply voltage 12V D.C.

Maximum voltage tolerance ±10% 

Absorbed power supply 58W 

Maximum utilization ratio 100% 

Directional control valve characteristics (60 l/min) 

Max. working pressure 275 bar (3988 PSI) 

Max. back outlet pressure 25 bar (3363 PSI) 

Emergency operation or in case of power failure With lever 

Max. spool leakage of A and B ports to T port at 1450 PSI with viscosity 35 mm2/s 5 cm3/min

Slider: 103 cylinder

Flow [l / min]: 60

Max pressure [bar]: 350 = 5076psi

Overflow [bar]: 150

Power connection [BSP]: 3/8 ”

Receiver connection [BSP]: 1/2 "

Tank connection [BSP]: 1/2 "

Cylinder Spool type, for request we can build valve with ''D spool'' motor type.

JUUKO HSK 800 Industrial Remote Crane Control Radio System kit include all cables.

Frequency band 433MHz~434MHz

Modulation method GFSK

Typical operating range 100 m

Control system PLL

Antenna impedance 50Ω

Typical response time for Stop command and commands 50ms ~ 100 ms

Power supply LR6(AA)1.5V x2

Average power consumption 8mA@DC3V

Operating and storage temperature (-20°C)~(+55°C)/(-40°C)~(+65°C)

Radio-frequency power <10dbm

Protection degree IP65

Dimensions 193x57x51 mm

Weight 226g

Housing material PA (30% GF)

K800 8 PUSH BUTTON SINGLE SPEED

Independent LED’s,indicate the status of the battery.

Switching power system.

Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable.

The system automatically change to a another frequency in the presence of radio interference.

Eco power management system. Save on batteries.

It can receive and display via LED 1 and LED 2, signals coming from the machine control system (relay action feedback).

Mushrooms type EMO button.

Wireless pairing procedure using the keyboard pushbuttons.

It is widely used in hydraulic systems in construction, agriculture and industry.

The valve is suitable for various types of machines such as: agricultural machines, tractors, sprayers, cyclops, HDS loaders, turners, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically operated equipment.

Ideally suited for machines and vehicles where it is required to be able to control the distributor from two places, e.g. electrically from the cab and with levers while standing directly at the distributor, this is the case, for example, with HDS and cranes.