Monoblock directional control valve Galtech Q95 120l/min 12 V  11 sections for Heavy Duty Wrecker Tow 

Valve controlled electrically and by additional lever.

Lever three positions

Position the first neutral (lever positioned vertically piston cylinder stands - oil goes to overflow

Position the second working (lever set to slant forward) piston cylinder extends.

Position the third working (lever set to slant backward) piston cylinder retracts.

Threads inside valve:

Power P 3/4''BSP

A/B cylinders: 3/4 ''BSP

Return Tank T: 3/4'' BSP

Construction = Monoblock

Material of Construction = Steel

Material of Construction = Case Hardened Steel

O-rings made of NBR (Buna-N®)

Spool Type = Cylinder. Motor Spools also available

On overflow valve:

Factory set at 175Bar = 2538psi

The possibility of self-regulation, a full rotation change pressure for 30Bar = 435psi.

Allowable pressure:

Flow: 160 bar = 2320,6psi

Max pressure: 350bar = 5076,3psi

Permitted the ambient temperature: -40 ° C to + 60 ° C

Permissible oil temperature: -15 ° C to + 80 ° C

Oil type:

Hydraulic oil based on mineral oil

It has a wide range of applications in hydraulic systems in agriculture, horticulture, forestry, construction and wider industry.

The distributor is suitable for various types of machinery such as: agricultural machinery, tractors, sprayers, turners, cyclops, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machinery and other hydraulically controlled equipment.

Ideally suited for machines and vehicles where it is required to be able to control the distributor from two places, e.g. electrically from the cab and with levers while standing directly at the distributor, such as on HDS and cranes.

HIGH QUALITY Made in Italy.

Cylinder Spool type, for request we can build valve with ''D spool'' motor type.

The Powerbeyond bushing is a device that allows the activation of an additional flow-limited valve downstream of another valve, by changing the function of the 'T' port to a pressure port. This solution provides power to the downstream valve from the port normally intended for the 'tank', allowing the transfer of high pressure. To use this functionality, it is also necessary to remove the cap from the top of the valve block, allowing it to be used as a reservoir connection.