Hydraulic valve kit 4 functions  + 4 swimming  sections 40 l/min (16GPM) 2 joysticks 

All sliders on the three-position sections are spring-loaded, meaning they return to the neutral position by themselves.

Maximum flow: up to 40L/min

Internal threads in the body:

- Connection port supply: 1/2''

- Connection port return: 1/2''

- Connection port sections: 3/8''

Cable connections:

- Internal thread of tube: M16x1.5

- Slide end internal thread: M6x1.5

Pressure range: 

Maximum supply pressure: 250Bar (3625,94 psi)

Maximum pressure on return: 50Bar (725,1p psi)

Maximum pressure on sections: 300Bar (4351,13 psi)

Temperature range and oil type: 

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C

Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46

The hydraulic valve is suitable for various types of machinery such as: agricultural machines, tractors, sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically operated equipment.

It is used wherever, for reasons of safety, better control comfort and the need for cleanliness, it is required to mount the distributor outside the cab. Only the control unit, e.g. the joystick, remains in the cab. 

HIGH QUALITY Made in EU

Indemar 6019 single button joystick.

A modern simple to use joystick intended for 2-section hydraulic directional control valves.

It has a robust lightweight casing and an on/off button.

It is widely used in hydraulic systems in agriculture, construction and industry.

Adapted to control three sections in a hydraulic system by means of:

two cables and a button.

It can be used to control the three sections of the frame without any problems:

the frame lift, the tilt leveller and the bale grab or crocodile.

It is designed for various types of machinery such as:

aurochs, loaders, cyclops and forklifts and for other hydraulically controlled equipment.

Ideal for controlling 1, 2, 3, Ursus, Zetor, MF tractors and many others.

Hydraulic Valve Cable for Joystick Controllers 78.7'' -2 meters

Technical data:

Max. cable stroke: 30±2 mm

Disconnection load of conduit terminal: 3000 N

Disconnection load of wire rope terminal: 3000 N

Min. bending radius: 200 mm

Operating temperature: -30° ÷ +80° C

IB-431216

Choice of metal or plastic ball.

It is widely used in hydraulic systems in agriculture, construction and industry.

The cables are adapted to control hydraulic distributors in various types of machines such as: agricultural machines, tractors, sprayers, turners, HDS loaders, cyclops, construction machines, loaders, excavators, sweepers, industrial machines and to other hydraulic devices controlled by joysticks.

If you need lines of 1m, 1.5m, 2.5m, or 3m, please contact us.

The Powerbeyond sleeve is a device that allows an additional manifold to be connected by using a pressure transfer port.

This solution provides power to another valve from a normally closed port allowing high pressure to be transmitted.

To use this function, it is necessary to remove the plug from the pressure transfer port and screw the pressure transfer sleeve in place.