Hydraulic valve 2 sections HM Line 80 l/min 21 GPM 24V double acting for cylinder spool.

AMV70 is an ideal control valve for flow rate 80l/min and operating pressures up to 315 bar. With its unique design AMV70 has a wide application range.

Valve is equipped with an adjustable main relief valve.

Available in parallel (in standard) and series circuit.

Load hold check valve.

Specification:

Working pressure P max: 315 bar ( 4568.69 psi)

Ambient temperature: ˗40°C ... +60°C

Permissible oil contamination: max. Class 10 (NAS1638), 19/16 (ISO 4406)

Recommended oil viscosity: 10cSt - 75cSt

Solenoid: 80W, 4 pin, DIN43650, IP65

Threads BSP: P-P1-T1   = G 1/2", A/B = G 1/2", T2 = G 3/4",  T = G 3/4"

Fits to: CEW-12DC-RE51

Oil temperature: ˗20°C ... +80°C

Construction:

Connection:

Scheme:

Juuko HSK 400 industrial radio remote control crane system kit including all cables. 

Frequency band 433MHz~434MHz

Modulation method GFSK

Typical operating range 100 m

Control system PLL

Antenna impedance 50Ω

Typical response time for Stop command and commands 50ms ~ 100 ms

Power supply LR6(AA)1.5V x2

Average power consumption 8mA@DC3V

Operating and storage temperature (-20°C)~(+55°C)/(-40°C)~(+65°C)

Radio-frequency power <10dbm

Protection degree IP65

Weight 226g

Housing material PA (30% GF)

K400 4 pushbutton single speed.

Independent LED’s,indicate the status of the battery.

Switching power system.

Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable.

The system automatically change to a another frequency in the presence of radio interference.

Eco power management system. Save on batteries.

It can receive and display via LED 1 and LED 2, signals coming from the machine control system (relay action feedback).

Mushrooms type EMO button.

Wireless pairing procedure using the keyboard pushbuttons.