The versatility of this valve makes it the perfect control device for all sectors: Harvesting Machines, Brushcutter, Conveyors, Baling Machines, small Front Loaders, Truck Mounted Cranes etc. One‑section execution for circuits with carry‑over (SD5/1‑D) or without (SD5/1‑N) are available.

- Type "S" free flow gallery

- Single check valve

- Parallel, series and tandem circuit

- Manual, hydraulic, electro-hydraulic, electric and pneumatic controls.

Ports thread:

Inlet P and carry--over C: G 3/8 BSP

Ports A and B: G 3/8 BSP

Outlet T: G 3/8 BSP

Working conditions:

Hydraulic valve flow divider 50:50 V-EQ30 1/2"

Recommended flow is:  between 40 - 60 l/min   (10,57 - 15,85 gallon l/min)

Number of hydraulic holes in the body: 3

Internal threads in the body [BSP]: 1/2''

Material: cast iron

Pressure range:

Permissible maximum pressure: 250bar

Temperature range and oil type:

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C

Oil type: Mineral oil based hydraulic oil

Control panel for the Hydraulic Valves.

All up-down switches with automatic centring (1-0-2) with no latching.

Each panel is sold complete with a 2m power cable with plug, and a set of 4m cables each with plugs for the distributors. We also have extension cable sets of 3m, 5m or 9m.

In the switched position of any of the switches, the signal is also applied simultaneously to an additional pair of wires, which can be used to activate warning signals (horn, cockerel), or to switch on the pump via a relay.

All the panels offered, by default, are equipped with pushbuttons with positioning spring-loaded, which automatically return to the neutral position.

Include all plugs.

Power cable 2 meters and from panel to valve 3 meters.

Control of e.g. such 7-section directional valves.

Can be used with MF, CASE, Caterpillar, Komatsu, Volvo, JCB, Liebherr, Hyundai, Bobcat, Kawasaki, John Deere..... and many more.