Juuko 1000 radio remote control hydraulic valve 5 spool 80 l/min 24VDC

All three-position sliders on a spring, i.e. they return to the neutral position by themselves when the power supply is cut off.

Slider principle:

Position 1 neutral (power supply cut off) cylinder piston rod stalls - oil goes to overflow.

Position 2 operational (power supply to solenoid one only) cylinder piston rod extends.

Position 3 operating (power supply to solenoid two only) cylinder piston rod retracts.

Internal threads in the body:

Connection port supply: 1/2''

Connection port return: 3/4''

Connection port sections: 1/2''

Pressure range:

Maximum supply pressure: 250Bar (3625,94 psi)

Maximum pressure on return: 50Bar (725,19 psi)

Maximum pressure on sections: 300Bar (4351,13 psi)

The opening pressure of the bypass valve increases proportionally with increasing flow rate:

180 bar (2610,68 psi) at 20 l/min (5,28 gallon/min)

190 bar (2755,72 psi) at 40 l/min (10,57 gallon/min)

200 bar (2900,75 psi) at 60 l/min (15,85 gallon/min)

210 bar (3045,79 psi) at 80 l/min (21,13 gallon/min)

It is recommended to check and set the correct pressure before commissioning.

Self-adjustable, full rotation 30Bar (435,11 psi change).

Temperature range and oil type: 

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C

Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46

Recommended oil filtration of 10 - 15 µ

Open centre system (pump-to-tank flow)

Modification / Spools with 1 to 7

HIGH QUALITY Made in EU

The hydraulic valve is widely used in hydraulic systems in construction, industry and agriculture.

The valve is adapted to various types of machines such as: 

sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, agricultural machines, tractors, industrial machines and other hydraulically operated equipment.

Can be used with MF, CASE, Caterpillar, Komatsu, Volvo, JCB, Liebherr, Hyundai, Bobcat, Kawasaki, John Deere..... and many more.

Scheme:

JUUKO HSK 1000 Industrial Remote Crane Control Radio System

K series, One of the most shock resistant transmitter, is constructed of an ultra-high impact resistant comer bumper.

The corners of K series are reinforced for firmer grip and added protection in case of drop.

Frequency band 433MHz~434MHz

Technical data:

Modulation method GFSK

Typical operating range 100 m

Control system PLL

Antenna impedance 50Ω

Typical response time for Stop command and commands 50ms ~ 100 ms

Power supply LR6(AA)1.5V x2

Average power consumption 8mA@DC3V

Operating and storage temperature (-20°C)~(+55°C)/(-40°C)~(+65°C)

Radio-frequency power <10dbm

Protection degree IP65

Dimensions 193x57x51 mm

Weight 226g

Housing material PA (30% G

K1000 10 PUSH BUTTONS SINGLE SPEED

Independent LED’s,indicate the status of the battery.

Switching power system.

Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable.

The system automatically change to a another frequency in the presence of radio interference.

Eco power management system. Save on batteries.

It can receive and display via LED 1 and LED 2, signals coming from the machine control system (relay action feedback).

Mushrooms type EMO button.

Wireless pairing procedure using the keyboard pushbuttons.