Monoblock Hydraulic Bank Motor 2 Spool Valves 90 l/min 24 GPM 12 V + JUUKO Wireless Control Panel

New product

Galtech

MONOBLOCK GALTECH 90L 2 SECTIONS 12 V

+ JUUKO HSK 400 Industrial Remote Crane Control Radio System kit include all cables

Remote radio 4 buttons pdf instruction

More details

9 Items

2 529 $

Valve controlled electrically and by additional lever.

The levers on the spring that helps back to the vertical position

Perfect for machines and vehicles which require the ability to control distributor of two places: electrically from the cabin and levers standing directly on the valve, as for example. HDS-edged and cranes.

Lever three positions
Position the first neutral (lever positioned vertically piston cylinder stands - oil goes to overflow

Position the second working (lever set to slant forward) piston cylinder extends.

Position the third working (lever set to slant backward) piston cylinder retracts.

Threads inside valve:

Power P 1/2 ''BSP

A/B cylinders: 1/2 ''BSP

Return Tank T: 3/4'' BSP

On overflow valve:
Factory set at 175Bar
The possibility of self-regulation, a full rotation change pressure for 30Bar.

Allowable pressure:
Flow: 150 bar
Max pressure: 300bar
Permitted the ambient temperature:
-40 ° C to + 60 ° C
Permissible oil temperature:
-15 ° C to + 80 ° C
Oil type:
Hydraulic oil based on mineral oil


HIGH QUALITY Made in Europe !

MONOBLOCK GALTECH 90 L/MIN 2 SECTION (ELECTRICALLY CONTROLLED BY WIRELESS PANEL + MANUALLY BY LEVERS)


Valve type GALTECH flow 90l/min
Magnet connection Type DIN 43650 (vers. A)
Protection type IP65
Coil insulation class H Supply voltage 24 V D.C.
Maximum voltage tolerance ±10%
Absorbed power supply 58W
Maximum utilization ratio 100%
Directional control valve characteristics (60 l/min)
Max. working pressure 275 bar (3988 PSI)
Max. back outlet pressure 25 bar (3363 PSI)
Emergency operation or in case of power failure With lever
Max. spool leakage of A and B ports to T port at 1450 PSI with viscosity 35 mm2/s 5 cm3/min Made in Italy


JUUKO HSK 400 Industrial Remote Crane Control Radio System
Frequency band 433MHz~434MHz
Modulation method GFSK
Typical operating range 100 m
Control system PLL
Antenna impedance 50Ω
Typical response time for Stop command and commands 50ms ~ 100 ms
Power supply LR6(AA)1.5V x2
Average power consumption 8mA@DC3V
Operating and storage temperature (-20°C)~(+55°C)/(-40°C)~(+65°C)
Radio-frequency power <10dbm
Protection degree IP65
Weight 226g
Housing material PA (30% GF)
K400 4 PUSHBUTTON SINGLE SPEED

Independent LED’s,indicate the status of the battery.
Switching power system.
Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable.
The system automatically change to a another frequency in the presence of radio interference.
Eco power management system. Save on batteries.
It can receive and display via LED 1 and LED 2, signals coming from the machine control system (relay action feedback).
Mushrooms type EMO button.
Wireless pairing procedure using the keyboard pushbuttons.

Quantity Discount You Save
5 10% Up to 1 265 $
10 15% Up to 3 794 $
20 25% Up to 12 645 $

30 other products in the same category