Remote Radio juuko 1000

Max flow: 50 l/min (13GPM)

Solenoids:12VDC 37W

Technical parameters for monoblock:

Adjustable relief valve (one turn 360 degrees is 35 bar = 508psi (factory set 175 bar = 2538psi)

BSP type Screw Power and Back 1/2''  Output 3/8''

Max operating pressure P = 3600psi (250 bar); T = 150psi (10 bar); A , B = 4300psi (300 bar)

Open centre system (pump-to-tank flow)

Internal leakage A(B)-T,P=100 bar = 1450psi viscosity 35 cSt max 18 ccm/min

Spools , Schemes Spool A ; D

Spool Stroke 3.2 mm

Coils , connector ISO 4400 12VDC,24VDC

Threads P,T - G1/2,SAE 10 A,B-G3/8, SAE 8

Modification / Spools with 1 to 7

HIGH QUALITY Made in EU

Control panel Juuko K1000 +reciver

Independent LED’s,indicate the status of the battery.

Switching power system.

Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable.

The system automatically change to a another frequency in the presence of radio interference.

Eco power management system. Save on batteries.

It can receive and display via LED 1 and LED 2, signals coming from the machine control system (relay action feedback).

Mushrooms type EMO button.

Internal BootLoader, up firmware to the date from JUUKO’s website.

Wireless pairing procedure using the keyboard pushbuttons.

Frequency band 433MHz~434MHz

Modulation method GFSK

Typical operating range 100 m

Control system PLL

Antenna impedance 50Ω

Typical response time for Stop command and commands 50ms ~ 100 ms

Power supply LR6(AA)1.5V x2

Average power consumption 8mA@DC3V

Operating and storage temperature (-20°C)~(+55°C)/(-40°C)~(+65°C)

Radio-frequency power <10dbm

Protection degree IP65

Dimensions 193x57x51 mm

Weight 226g

Housing material PA (30% GF)

K1000 10 PUSHBUTTON SINGLE SPEED

Can be used with MF, CASE, Caterpillar, Komatsu, Volvo, JCB, Liebherr, Hyundai, Bobcat, Kawasaki, John Deere..... and many more.