Radio Scanreco RC400 6 Functions 12V Or 24V + Walvoil DPX 100 Full Proportional Fassi Crane

$6,700
Category Home Brand Scanreco In stock 10 Items
Product ID: 717

6 Functions.

Customer-specific configuration, fully customisable.

Contact us and we will adapt the radio control to your machine.

Valve for pump variable disaplacment with LS port.

  • Share this:
  • pack2_securityCreated with Sketch. Secured Payment
  • pack2_carrierCreated with Sketch. Fast Delivery
  • pack2_parcelCreated with Sketch. 24/7 Tech Support

Radio Scanreco RC400 6 Functions 12V Or 24V + Walvoil DPX 100 Full Proportional Fassi Crane

$6,700

6 Functions.

Customer-specific configuration, fully customisable.

Contact us and we will adapt the radio control to your machine.

Valve for pump variable disaplacment with LS port.

Informations

Scanreco 6 functions RC 400 6 manipulators 12V or 24 V + Walvoil DPX 100 full proportional Open center + additional levers  6 sections with ''J'' crane spool valve with compensation section, valve for pump variable disaplacment with LS port.

Scanreco RC400 Radio Remote Control Systems.

The Scanreco RC 400 G2B remote control system has been especially developed for

hydraulically driven mobile cranes and machinery. The system is a digital remote

control system based on an extremely advanced microprocessor technology. Years of

exhaustive and demanding testing have shown that the remote control system can

cope with the roughest of environments.

The system is protected against electromagnetic and radio frequency radiation and

can be installed onto all hydraulic valve types (voltage, current pulse width, or

protocol steered) found on the market.

In its basic form the remote control system is comprised of a portable control unit

with manoeuvre levers for proportional control and switches for ON/OFF functions, a

central unit with connection cable for driving proportional electro-hydraulic slide

controllers.

Digitally coded control information (lever deflection and switch position) is sent from

the portable control unit via radio to the central unit. The portable control unit and

central unit translate the magnitude and direction of the manoeuvre lever deflections

and switch position.

It can be used for four typical proportional functions, e.g.

-Slewing (rotation of crane)

-Main lift

-Jib

-Extension

-Grab open / close

-Rotator

You can also choose a different function as below:

Extremely easy to use, safe, fast and precise; its electronic core, based on advanced microprocessor technology, is highly configurable.

If you have crane with valve manually controlled by levers this kit is for you. Extremely easy to use, safe, fast and precise; its electronic core, based on advanced microprocessor technology, is highly configurable.

With this kit you stay with your old hydraulic valve and control crane with remote radio.

However the kit complete does not need such a high quality valve. This kit comes with a servo unit that connects to the con rods or directly to a standard control valve and replicates the users hands pushing and pulling the levers. The servo unit will connect to the original control valve on the crane or the connection rods to the auxiliary side.

The "Mini" is a compact and versatile transmitter that can be easily adapted to customer requirements. Thanks to its modular design, the "Mini" can be supplied with either 1 to 6 linear levers or 1 to 3 joysticks and additional buttons and switches. Despite the compact format, all operating elements are sufficiently large and designed for long and fatigue-free operation.

In addition to standard functions, the transmitter also offers numerous optional settings and functions for optimum operator guidance.

The speed of proportional movements can be set in five stages using a latching switch. The operator receives feedback from the controlled machine via the display and LEDs. Automatic frequency management ensures trouble-free operation even in the event of interference from other radio devices in the vicinity. On-site calibration allows authorized users to adjust system settings without additional tools or software.

The transmitter has an individual identification code and communicates with the receiver via a proprietary protocol.

This ensures that no other transmitters (from Scanreco or other manufacturers) can accidentally activate the machine.

The tamping function complies with performance level "e" (PL e), the highest level according to ISO 13849-1, a legally binding standard for safety-critical control components. 

The "G2" receiver is available with proportional and digital outputs as well as a CANopen interface. Thanks to its numerous interfaces and setting options, the "G2" is suitable for practically all mobile hydraulic applications.

The analog output signals can control voltage and current-controlled hydraulic valve blocks. Several receivers can be connected together in a master-slave configuration if more functions are required than a single receiver can provide.

The numerous functions of the integrated basic controller support a wide range of performance and functions. The basic controller makes it possible to dispense with numerous external electronic components (PLC, relays, diodes, etc.). 


Walvoil DPX 100 full proportional Open center + additional levers  6 sections with ''J'' crane spool 
valve with compensation section, valve for pump variable disaplacment with LS port.

Directional valve of the DPX series and the most versatile and complete. Highly configurable and versatile for applications such as Miniexcavators, Aerial platform, Truck Mounted Cranes, Telehandlers, Agricultural and Forestry machines.

- Valve model for high pressure applications (HP), inspheroidal graphite cast iron

- Optional spool position sensors

- Valve configurations with high flow sections (HF)

- Special inlet sections designed for steering applications

- Synergy with the Walvoil electronic systems range

- Inlet sections with or without by-pass valve

- Manual, hydraulic and proportional electro-hydraulic controls

Dimensional data and performance:

Working conditions:


Specification:

DPX100 / 6 / AM1 (TGW3-170 / LT) ... RDR (03) -NOTAP (L) -12/24VDC 
6-way prop valve 120l / min.-300bar-3/4 "-1/2" 

DPX100 / 6 / AM1 (TGW3-170 / LT) 

QE-E105 (60l/min) -8EB3TLH 

QE-E105 (60l/min)) -8EB3TLH 

QE-E2H04 (60l/min)) -8EB3TLH 

QE-E2H05 (60l/min)) -8EB3TLH 

QE-E2H05 (60l/min)) -8EB3TLH 

QE-E2H05 (60l/min)) -8EB3TLH 

RDR (03) -NOTAP (L) -24VDC 

Entrance plate: 
For open center circuit (constant pump) - DBV 40-220bar - compensator - connections P + T + LS (LS 
closed) - 120l / min - pmax 300bar 
All sections are equipped with pressure compensators and work according to the flow sharing principle 

1st section: 
4/3 center: A + B closed, electro-hydraulic control on both sides with AMP-JPT connector with hand lever 
activity 
Slide: 60l / min 

2nd section: 
4/3 center: A + B closed, electro-hydraulic control on both sides with AMP-JPT connector with hand lever 
activity 
Slide: 60l / min 

3rd section: 
4/3 center: A + B closed, electro-hydraulic control on both sides with AMP-JPT connector with hand lever 
activity 
Slide: 60l / min 

4th section: 
4/3 middle: A + B throttled to the tank on both sides with electro-hydraulic control with AMP-JPT connector 
Hand lever actuation 
Slide: 60l / min 

5th section: 
4/3 middle: A + B throttled to the tank on both sides with electro-hydraulic control with AMP-JPT connector 
Hand lever actuation 
Slide: 60l / min 

6rd section: 
4/3 middle: A + B throttled to the tank on both sides with electro-hydraulic control with AMP-JPT connector 
Hand lever actuation 
Slide: 60l / min 
 
Output plate: 
with bleed valve (LS relief) - with pressure reducing valve - control connection "V" closed and 
Drainage connection "L" open - side connections "T1", "P1", "LS1" closed 


This kit is configured for the most popular machine settings, supporting up to 6 standard crane functions.

If you require a different dedicated configuration, we can customize it to meet your needs, including variations in spools, voltage, the number of sections, anti-shock valves, connectors, etc.

The relief valve can also be adjusted as required. Spool type and flow can be individually selected to suit your application. Please send us a diagram, and we can assist further.

The kit is designed for plug-and-play convenience. We handle everything from the plugs to the software configuration.

We provide technical support and are readily available via email, whatsup and telephone.

Feel free to contact us at [email protected] or [email protected] for any inquiries or assistance.

After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.

Note! After your bid please inform us about serial numer of your crane ond type of valve then we add right electric plugs.

Volume discounts

Quantity Unit discount You Save
5 10% $3,350
10 15% $10,050
20 25% $33,500

Do you need help?

Client Contact

 

Looking for a non-standard product?

We are able to prepare a customized solution especially for you.

Looking for a non-standard product?

We are able to prepare a customized solution especially for you.

Related Products