Previous
Next
Radio Remote Scanreco Mini G2B + MTH Joysticks + Juuko Controller
5,705 $
Product ID: 1120
Scanreco G2B Maxi 2 joysticks 12/24V with MTH Joysticks and Juuko JN400 Pocket
This kit is designed for unusual settings where more functions are required. If you require a different dedicated configuration, we can customize it to meet your needs. Please send us a diagram, and we can assist further.
The kit is designed for plug-and-play convenience. We will supply the appropriate domes, bolts and nuts for assembly
We provide technical support and are readily available via email, whatsup and telephone.
- Share this:
- Secured Payment
- Fast Delivery
- 24/7 Tech Support
Information
Scanreco G2B Mini with 2 joysticks
| Two, 3-axis joysticks | |
|---|---|
| Stop function according to EN ISO 13849-1 Cat. 3, PL e | |
| Various toggle switches, buttons and rotary switches | |
| Frequency bands: 433-434 or 902-928MHz (other frequencies available on request) | |
| Operating range > 100 m / > ~330 ft. | |
| Degree of protection: IP65 | |
| Operating temperature: -20°C to +70°C / ~-4°F to +160°F | |
| Cable control: standard length 10 meters / ~33 ft. | |
| G2B Receiver PWM 12 or 24 VDC power supply | |
| Choice of radio or cable control | |
| 8 bi-directional proportional outputs | |
| All analog outputs are programmable for final setting of speeds | |
| 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output) | |
| A DV output to control the dump valve | |
| Radio communication in the ISM band using frequency hopping technology |
| Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available). | |
|---|---|
| Programmable logic with block, soak, decelerate, ramp functions and much more | |
| Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required. | |
| Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display) |
MTH Joystick
| Number of Poles | 12 |
|---|---|
| Power Supply | 8 … 32VDC |
| Power Consumption | max. 20 mA @ 32 V |
| Output Signal - Full Bandwidth | 0.5 - 4.5V (2.5 V in neutral position) |
| Output Signal - Tolerance (neutral and full deflection) | ± 0.15 V both sides per axis |
| Output Signal - Redundancy signal (crossed) | 0.5 - 4.5V (2.5 V in neutral position) |
| Output Signal- Max. load | < 1mA |
| Deflection Angle | ± 20° ± 1° |
| Actuation Force Max. | 6 ± 1N |
| Max. Cycles per Axis | > 1 million |
| Temperature Protection | -40°C ... +85°C |
| Protection Class above the Mounting Flange | IP65 |
| EMC Compatibility | 100 V/m - ISO13766, ISO14982 |
Juuko Controller
| Pushbuttons | 4 Single pressure motion buttons |
|---|---|
| Number of available ON/OFF command | Max 4 + Start & Stop pushbutton |
| Command Response Time | ~ 50 ms |
| Frequency Band | 433.0525 > 434.7900 Mhz |
| Channel Space | 12.5 kHz |
| Radio Communication | Bi-directional continuous transmission |
| Antenna Impedance | 50 Ohm |
| Maximum Operating Distance | 60 meters (free field) |
| Hamming Distance | ≥ 15 |
| Power Supply | LR6 (AAA)1.5V / NiMH(AAA) 1.2V x2 |
| Dimensions | 79 x 45.7 x 23.5mm |
| Weight (with Battery) | Approx. 78g |
| Protection Degree | IP65 |
| Housing Material | PA66 (GF30%) |
| Operating / Storage Temperature | (-25°C)~(+55°C) / (-40°C)~(+85°C) (-13°F)~(+131°F) / (-40°F)~(+185°C) |
The kit works with a lot of application. For sure please contact with us.
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 5 | 4% | 1,141 $ |
| 10 | 8% | 4,564 $ |
| 20 | 15% | 17,115 $ |
Do you need help?
Looking for a non-standard product?
We are able to prepare a customized solution especially for you.
Related Products
Previous
Next
Bestsellers
Previous
Next