REMOTE RADIO CONTROL Scanreco RC 400 6 FUNCTIONS for HIAB

Radio Remote Scanreco Rc 400 G2b 6 Function Retrofit Kit For Crane With Valve Without Solenoids Fassi Hiab Palfinger 12 V

Name: Radio Remote Scanreco Rc 400 G2b 6 Function Retrofit Kit For Crane With Valve Without Solenoids Fassi Hiab Palfinger 12 V
Brand: Scanreco
SKU: RC400
Price: 6900 USD
Availability: InStock

6,900 $

Reference RC400 Category Hydraulic valve with Radio remote on-off & Control panel Brand Scanreco In stock 15 Items

Product ID: 942

Complete solution Remote radio Scanreco G2B Mini and electric proportional actuator block for cranes with just manually controlled valves, without electric solenoids.

This system can be fitted with most type of existing hydraulic control valves. Electric servo actuator block is connected mechanically with long horizontal rods on crane, here is example of servo block installation:

Electro proportional solenoid valves guarantee high quality movements control..

Real Youtube video with rods movements:

https://www.youtube.com/watch?v=FdLGIrEEiQM&t=6s

PDF DATA SHEET AVAILABLE

Radio Remote Scanreco Rc 400 G2b 6 Function Retrofit Kit For Crane With Valve Without Solenoids Fassi Hiab Palfinger 12 V

6,900 $

Complete solution Remote radio Scanreco G2B Mini and electric proportional actuator block for cranes with just manually controlled valves, without electric solenoids.

Electro proportional solenoid valves guarantee high quality movements control..

Real Youtube video with rods movements:

https://www.youtube.com/watch?v=FdLGIrEEiQM&t=6s

PDF DATA SHEET AVAILABLE

Information

Scanreco RC400 Radio Remote Controller Retrofit Kit for Levers include:

- Transmitter RC 400 G2B Mini

- Receiver with all cables

- 2 batteries

- Battery charger

- Neck belt

- Instruction in English

- Actuator block +oil filter+ pressure reducer block

Scanreco RC400 Radio Remote Control Systems.

The Scanreco RC 400 G2B remote control system has been especially developed for

hydraulically driven mobile cranes and machinery. The system is a digital remote

control system based on an extremely advanced microprocessor technology. Years of

exhaustive and demanding testing have shown that the remote control system can

cope with the roughest of environments.

The system is protected against electromagnetic and radio frequency radiation and

can be installed onto all hydraulic valve types (voltage, current pulse width, or

protocol steered) found on the market.

In its basic form the remote control system is comprised of a portable control unit

with manoeuvre levers for proportional control and switches for ON/OFF functions, a

central unit with connection cable for driving proportional electro-hydraulic slide

controllers.

Digitally coded control information (lever deflection and switch position) is sent from

the portable control unit via radio to the central unit. The portable control unit and

central unit translate the magnitude and direction of the manoeuvre lever deflections

and switch position.

It can be used for four typical proportional functions, e.g.

-Slewing (rotation of crane)

-Main lift

-Jib

-Extension

-Grab open / close

-Rotator

You can also choose a different function as below:

brExtremely easy to use, safe, fast and precise; its electronic core, based on advanced microprocessor technology, is highly configurable.

If you have crane with valve manually controlled by levers this kit is for you. Extremely easy to use, safe, fast and precise; its electronic core, based on advanced microprocessor technology, is highly configurable.

With this kit you stay with your old hydraulic valve and control crane with remote radio.

However the kit complete does not need such a high quality valve. This kit comes with a servo unit that connects to the con rods or directly to a standard control valve and replicates the users hands pushing and pulling the levers. The servo unit will connect to the original control valve on the crane or the connection rods to the auxiliary side.

MOD10 proportional servocontrols actuator block.

The hydraulic bank MOD10 electrohydraulic system, when coupled with a manual hydraulic distributor, allows for remote control.

The bank is made up of a manifold with mounted on as much sections (modules) as the movements to activate. All the modules are identical and they are fixed to the manifold with four screws stay. Each module works as standalone.

The coupling of the hydraulic bank pistons to the manual distributor, already mounted on the machine, is done by brackets to screw on the dual control rods which have to be coupled with the forks mounted on each piston.

It is possible to connect the forks to a different leverage system as long as is guaranteed, with right slots, an enough play to prevent stress in different direction than the axial one.

The product has a high reliability.

The installation of this block adds to a hydraulic valve the remote control, by cable or by radio. The specific design for the dual control rods allows its installation on any type of hydraulic mechanical valve.

Fluid type: Mineral oil 10 ÷ 200 cSt

Max blow-by: 100 cc/minute

PWM solenoids (voltage signal)

The MOD10 offers 3 section spacing options; please specify which one you choose when purchasing.

Each module is made up of a hydraulic cylinder commanded by two proportional valves with mechanical feedback.

There are two mechanical strokes to choose from: 13 mm and 20 mm.

Hydraulic scheme:

Each kit includes counter-pressure blocks, bracket and a filter.

Manufactured by Scanreco AB Radio Remote Control Systems of Sweden.

As with all Scanreco products high quality and durability comes as standard and are able to withstand working in the toughest working environments.

Easy to use, safe, accurate and reliable. Designed with an electronic core, based on advanced microprocessor technology it is highly configurable to fit your exact requirements. With this model you can control all of the following operations on a crane with exceptional accuracy. – If have different requirements than those listed below please get in touch and we can help configure your unit to fit your requirements.

If you have a crane with a valve manually controlled by levers this equipment is ideal for you. It is extremely easy to use, safe, fast and precise; its electronic core, based on advanced microprocessor technology, it is highly configurable to meet the most demanding of requirements.

You are able to Retro fit this Scanreco RC400 to your existing equipment today, quickly and easily.

With this equipment you are able to keep your existing hydraulic valves and control your crane the safer more modern way with this radio remote controller.

However, the complete kit does not need always need to work with the highest quality valves. This kit comes with a servo unit that connects to the con rods or directly to a standard control valve and replicates the users hands pushing and pulling the levers. The servo unit will connect to the original control valve on the crane or the connection rods to the auxiliary side thereby making the actions of the user from the electronic Scanreco control panel.

Because this unit operates by Radio Control the operator does not have to be next to the crane or in the cab. So are able to position themselves in a safe position with clear sight of the cranes actions to enable easier and safer positioning of loads and visibility of obstacles.

Note! After your purchase please inform us about serial numer of your crane ond type of valve then we add right electric plugs.

6 functions kit perfect for Loglift, Jonsered, Epsilon, Liv, Hiab, Plafinger, Hmf, Atlas, Amco Veba, Fassi, Effer, Mec, Meiller, Mkg, Multilift, Mec, Meiller, Marell, Atlas, Huffermann, Palift, Heimann, Hyva, Janco, Wuko ,Picker also works with many other brands.

This kit is configured for the most popular machine settings, supporting up to 6 standard crane functions. If you require a different dedicated configuration, we can customize it to meet your needs, including variations in voltage, the number of sections, etc. Please send us a diagram, and we can assist further.

The kit is designed for plug-and-play convenience. We handle everything from the plugs to the software configuration.

We provide technical support and are readily available via email, whatsup and telephone.

Feel free to contact us at shop@hydraulic-master.com or damian@hydraulic-master.com for any inquiries or assistance.

After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.