Scanreco RC400 Radio Remote Control Systems.

The Scanreco RC 400 G2B remote control system has been especially developed for

hydraulically driven mobile cranes and machinery. The system is a digital remote

control system based on an extremely advanced microprocessor technology. Years of

exhaustive and demanding testing have shown that the remote control system can

cope with the roughest of environments.

The system is protected against electromagnetic and radio frequency radiation and

can be installed onto all hydraulic valve types (voltage, current pulse width, or

protocol steered) found on the market.

In its basic form the remote control system is comprised of a portable control unit

with manoeuvre levers for proportional control and switches for ON/OFF functions, a

central unit with connection cable for driving proportional electro-hydraulic slide

controllers.

Digitally coded control information (lever deflection and switch position) is sent from

the portable control unit via radio to the central unit. The portable control unit and

central unit translate the magnitude and direction of the manoeuvre lever deflections and switch position.

It can be used for four typical proportional functions, e.g.

-Slewing (rotation of crane)

-Main lift

-Jib

-Extension

-Grab open / close

-Rotator

You can also choose a different function as below:

The "Mini" is a compact and versatile transmitter that can be easily adapted to customer requirements. Thanks to its modular design, the "Mini" can be supplied with either 1 to 6 linear levers or 1 to 3 joysticks and additional buttons and switches. Despite the compact format, all operating elements are sufficiently large and designed for long and fatigue-free operation. 

In addition to standard functions, the transmitter also offers numerous optional settings and functions for optimum operator guidance. The speed of proportional movements can be set in five stages using a latching switch. The operator receives feedback from the controlled machine via the display and LEDs. Automatic frequency management ensures trouble-free operation even in the event of interference from other radio devices in the vicinity. On-site calibration allows authorized users to adjust system settings without additional tools or software. The transmitter has an individual identification code and communicates with the receiver via a proprietary protocol. This ensures that no other transmitters (from Scanreco or other manufacturers) can accidentally activate the machine. The tamping function complies with performance level "e" (PL e), the highest level according to ISO 13849-1, a legally binding standard for safety-critical control components.

The "G2" receiver is available with proportional and digital outputs as well as a CANopen interface. Thanks to its numerous interfaces and setting options, the "G2" is suitable for practically all mobile hydraulic applications. The analog output signals can control voltage and current-controlled hydraulic valve blocks. Several receivers can be connected together in a master-slave configuration if more functions are required than a single receiver can provide.

The numerous functions of the integrated basic controller support a wide range of performance and functions. The basic controller makes it possible to dispense with numerous external electronic components (PLC, relays, diodes, etc.).

Set contains:  

Hydraulic block actuators  4 functions 12v to be mounted on nr hcd4 distributor  

counter-pressure block 1/2" - 70 lt/min 

low pressure oil filter 7 micron 1/4 

Radio control multifunction scanreco rc400 g2b nr pwm a+b din 12v, minipult with 4 linear levscanreco rc400 radio remote control systems 

extremely easy to use, safe, fast and precise; its electronic core, based on advanced microprocessor technology, is highly configurable. with this kit you can control crane. 

Typically require 4 functions: 

transmitter (hand set) - horn 

stop/start - rpm +/- function 

4 proportional actuators 

pilot valve (up to 70ltr/min) 

full wiring kit 

2 x batteries & charger unit full handbook instructions  retro fit with modules.

HCD Actuator kit to mount on hydrocontrol valve 4 functions 12 V or 24 V

Proportional actuator blocks for direct connection on HCD (HYDROCONTROL)  hydraulic valves, were born to allow the remote control of a machine, which has these kinds of manual hydraulic valves: each module for HCD-SD that is part of the block can control one proportional function.

The direct installation on the back of the hydraulic valve guarantees the possibility for the user to make a very “precise” mounting, in a “limited” place. In this way risk of any eventual future “mechanical plays” is excluded.

The servo control HC-SD is a block of modular hydraulic pistons, electrically controlled by a couple of proportional valves, with mechanical feedback.

The product has a high reliability thanks to careful engineering and production process carried out with the most advanced technologies.

The installation of this block adds to a manual hydraulic valve the remote control, by cable or by radio.

The specific design made for the direct connection to the back of the valve allows a more precise handling of the machine compared to traditional installations of retrofit modules on the dual control rods.

Assembled banks are available up to 8 functions, without spaces between sections.

Banks are available for the following manufacturers: