List of products by brand Vivolo

About Vivoil

An Italian company founded in 1985 by Mr. Domenico Vivolo, who brought his 25 years of experience at Turolla, one of the most important companies in the hydraulic components sector. Today Vivoil Oleodinamica Vivolo srl is an international company with decades of experience that offers a range of high quality products manufactured by professionals.

Unidirectional Pumps

Unidirectional hydraulic pumps made of aluminum and with external gears. The direction of rotation is clockwise or counter-clockwise and can be reversed without additional components, so that it can be optimized for the storage space as required. The displacement of these products varies between 0.16 cm3/rev and 86.87 cm3/rev, the rotation speed reaches up to 9000 rpm and the maximum pressures go up to 320 bar.

Reversible Pumps

Reversible (bidirectional or bisensel) aluminum and external gears. Once installed in the application, they can rotate both clockwise and counterclockwise without the need for additional modifications. The displacement of the reversible pumps varies between 0.16 cm3/rev and 86.87 cm3/rev, the speed reaches up to 9000 rpm, the maximum pressures reach 320 bar.

Unidirectional Motors

Unidirectional hydraulic motors made of aluminum and with external gears. Rotation is clockwise or counterclockwise and can be reversed without additional components, allowing them to be optimized for storage space and adapted to specific needs. The displacement of these products varies between 0.45 cm3/rev and 86.87 cm3/rev, the rotation speed reaches up to 9000 rpm and the maximum pressure reaches up to 320 bar.

Reversible Motors

Reversible hydraulic motors made of aluminum and with external gears. They are used for some special applications and rotate alternately clockwise and counterclockwise. The displacement of the reversible motors varies between 0.45 cm3/rev and 86.87 cm3/rev, the speed reaches up to 9000 rpm, the maximum pressures reach 320 bar.

Flow Divider (Configuration RV-1D)

Hydraulic flow dividers made of aluminum and with external gears. They are also modular with more than 20 elements and available with relief and/or anti-cavitation valves. Machining is carried out using 5-axis machines and a single handle, which improves dimensional accuracy. The displacement of these flow dividers varies between 0.16 cm3/rev and 86.87 cm3/rev and the maximum pressures reach 300 bar.

No products available yet

Stay tuned! More products will be shown here as they are added.