Scanreco Handy 10 transmitter,  control unit (transmitter) has the following solutions:

The Scanreco Handy is a durable handheld transmitter equipped with innovative proportional pushbuttons. The movement speed directly corresponds to the button's displacement, allowing for smooth, variable speed control and greater precision compared to traditional single- or dual-step buttons. The large buttons are designed for easy operation, even when wearing work gloves. Four proportional functions can be controlled in two directions simultaneously. An additional operating mode allows for further proportional and digital functions. Labeling areas for text, numbers, or symbols are located on top and next to each button.

Standard AA batteries provide 20 hours of continuous operation, and recharging takes around two hours when connected to the charging cable. In situations where charging is not feasible, users can easily replace batteries without tools. Automatic frequency management ensures uninterrupted operation without interference from other wireless devices. The calibration feature allows authorized users to adjust speed settings without extra tools or software.

The transmitter communicates with the receiver using the Scanreco protocol and a unique identity code, ensuring that no other Scanreco transmitter or product can accidentally activate the machine. The stop function meets the safety level “d” (PL d) according to EN ISO 13849-1, a standard for safety-critical control system components. The Handy transmitter is built for heavy-duty use, delivering reliable performance known as Never-Stop Technology™ from Scanreco.

Handy 10 transmitter:

- 10 pushbuttons

- Proportional and digital functionality

- Dual operation modes duplicate the functionality of each button

- Operational and battery status indication by LEDs and a LED display

- Stop function in accordance with EN ISO 13849-1 cat. 3, PL d

- Operational time: 20 hours on a single charge

- Frequency bands: 433-434 or 902-928MHz

- Operating range: > 100m / > ~330 ft.

- Operational temperature: -25°C to +70°C / ~-15°F to +160°F

- Protection category: IP 65

- Dimensions (W x H x D): 76 x 253 x 50 mm / ~2.99 x 9.96 x 1.97 in

- Weight: 0.50 kg / 1.1 lbs. including batteries

Walvoil DPX 100 full proportional Open center + additional levers  6 sections with ''J'' crane spool valve with compensation section.

- Valve model for high pressure applications (HP), inspheroidal graphite cast iron

- Optional spool position sensors

- Valve configurations with high flow sections (HF)

- Special inlet sections designed for steering applications

- Synergy with the Walvoil electronic systems range

- Inlet sections with or without by-pass valve

- Manual, hydraulic and proportional electro-hydraulic controls

Dimensional data and performance:

Working conditions:

This kit is configured for the most popular machine settings, supporting up to 6 standard crane functions.

If you require a different dedicated configuration, we can customize it to meet your needs, including variations in spools, voltage, the number of sections, anti-shock valves, connectors, etc.

The relief valve can also be adjusted as required. Spool type and flow can be individually selected to suit your application. Please send us a diagram, and we can assist further.

The kit is designed for plug-and-play convenience. We handle everything from the plugs to the software configuration.

We provide technical support and are readily available via email, whatsup and telephone.

Feel free to contact us at [email protected] or [email protected] for any inquiries or assistance.

After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.

Note! After your bid please inform us about serial numer of your crane ond type of valve then we add right electric plugs.