Control valve for flow rate 60l/min and operating pressures up to 350 bar.
Valve is equipped with an adjustable main relief valve
Available in parallel (in standard) and series circuit
Load hold check valve
Wide range of spool options
Interchangeable Ø16mm Spools
Carry-over and closed center option
Recommended Oil Viscosity Range : 10 cSt to 75 cSt
Recommended Fluid Temperature Range: - 20 to + 80
Environmental Temperature Range : - 40 to + 60
Maximum Contamination Level : Class 10 (NAS 1638) 19/16 (ISO 4406)
Nominal Flow: 60l/min (16 US gpm)
Maximum Working Pressure: 350 bar
Maximum Back : 30 bar (430 psi)
Internal Leakage: 4 cc-9 cc (0,24-0,54 in3/m)
Standard & Optional Threads:
P-P1-T1 = G 1/2"
A/B = G 3/8"
T2 = G 1/2"
T = G 1/2"
RADIO REMOTE CONTROL PANEL JUUKO 1200 12 BUTTONS 12-24V
JUUKO HSK 1200 Industrial Remote Crane Control Radio System
Frequency band 433MHz~434MHz
Modulation method GFSK
Typical operating range 100 m
Control system PLL
Antenna impedance 50Ω
Typical response time for Stop command and commands 50ms ~ 100 ms
Power supply LR6(AA)1.5V x2
Average power consumption 8mA@DC3V
Operating and storage temperature (-20°C)~(+55°C)/(-40°C)~(+65°C)
Radio-frequency power <10dbm
Protection degree IP65
Housing material PA (30% GF)
K1200 12 PUSH BUTTONS SINGLE SPEED
Independent LED’s,indicate the status of the battery.
Switching power system.
Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable.
The system automatically change to a another frequency in the presence of radio interference.
Eco power management system. Save on batteries.
It can receive and display via LED 1 and LED 2, signals coming from the machine control system (relay action feedback).
Mushrooms type EMO button.
Wireless pairing procedure using the keyboard pushbuttons.