Inclination sensor FSI/AN 4-20mA Arm position sensor -10 +10
New product
Analogue slope sensor
The FSI-AN sensor is a slope analog transducer with 4 20mAcurrent output.
297 Items
It is a transducer with 3 wires:
The output current is proportional to
the inclination of the sensor compared to the
horizontal position (see picture).
The output current is proportional to
the inclination of the sensor compared to the
horizontal position (see picture).
Working:
Supply the sensor and read the output current
(directly with a milliamperometer or connecting
it to a PLC with 4÷ 20mAcurrent input).
Attention: the input resistance of the used instrument (for the measurement) must have a value that allows to the
sensor to supply the maximum current.
The maximum output tension of the sensor is “Vsupply - 5.5V“.
Fitting:
When you have positioned the sensor, with the long side perfectly in horizontal position, it has an output current value
between 11.9mAand 12.1mA. During the fitting, it is necessary to verify that the output current, in horizontal position,
is between the upon mentioned values. Otherwise, you have to act on the support slots to place the sensor in a
correct way.
| Quantity | Discount | You Save |
|---|---|---|
| 5 | 10% | Up to 213 $ |
| 10 | 15% | Up to 638 $ |
| 20 | 25% | Up to 2 125 $ |
30 other products in the same category
Related articles on blog
FSI INCLINATION SENSORS 4P RD AN DD: FSI-RD
FSI INCLINATION SENSORS 4P RD AN DD: FSI-DD
FSI INCLINATION SENSORS 4P RD AN DD: FSI-AN / Example with -55 +55 measure range
FSI INCLINATION SENSORS 4P RD AN DD: FSI-4P
Video
Click on a thumbnail to load the video
