Monoblock Hydraulic Valve 3 Sections 50l/min 15 GPM 24V + Remote Radio Juuko With Proportional Knob
Max flow: 50 l/min (13GPM)
Solenoids: 24V
+ Wireless control panel JUUKO
- Share this:
- Secured Payment
- Fast Delivery
- 24/7 Tech Support
Monoblock Hydraulic Valve 3 Sections 50l/min 15 GPM 24V + Remote Radio Juuko With Proportional Knob
Max flow: 50 l/min (13GPM)
Solenoids: 24V
+ Wireless control panel JUUKO
Informations
Monoblock hydraulic valve 3 sections 50l/min 15 GPM 24V + remote radio Juuko with proportional knob.
All three-position sliders on a spring, i.e. they return by themselves to the neutral position when the power supply is cut.
Slider principle:
Position 1 neutral (power supply cut off) cylinder piston rod stalls - oil goes to overflow.
Position 2 operational (power supply to solenoid one only) cylinder piston rod extends.
Position 3 operating (power supply to solenoid two only) cylinder piston rod retracts.
Internal threads in the body:
Connection port supply: 1/2''
Connection port return: 1/2''
Connection port sections : 3/8''
Pressure range:
Maximum supply pressure: 250 Bar (3625.94 psi)
Maximum pressure on return: 50 Bar (725.19 psi)
Maximum pressure on sections: 300 Bar (4351.13 psi)
The opening pressure of the bypass valve increases proportionally with increasing flow rate:
180 bar (2610.68 psi) at 10 l/min
190 bar (2755.72 psi) at 20 l/min
200 bar (2900.75 psi) at 30 l/min
210 bar (3045.79 psi) at 40 l/min
It is recommended to check and set the correct pressure before commissioning.
Self-adjustable, full rotation 30 Bar (435.11 psi change).
Temperature range and oil type:
Permissible ambient temperature: -40°C to 60°C
Permissible oil temperature: -15°C to 80°C
Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46
Recommended oil filtration of 10 - 15 µ
Open centre system (pump-to-tank flow)
Modification / Spools with 1 to 7
HIGH QUALITY Made in EU
The hydraulic valve is widely used in hydraulic systems in construction, industry and agriculture.
JUUKO HSK 600 Industrial Remote Crane Control Radio System with additional Proportional Knob
Frequency band 315 / 418 / 429 / 433 / 447 / 470 / 915 MHz / 2.4 GHz
Modulation method GFSK
Typical operating range 100 m
Control system PLL
Antenna impedance 50Ω
Typical response time for Stop command and commands 50ms ~ 100 ms
Power supply LR6(AA)1.5V x2
Average power consumption 8mA@DC3V
Operating and storage temperature (-20°C)~(+55°C)/(-40°C)~(+65°C)
Radio-frequency power <10dbm
Protection degree IP65
Weight 226g
Housing material PA (30% GF)
K600 6 PUSHBUTTON SINGLE SPEED
Independent LED’s,indicate the status of the battery.
Switching power system.
Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable.
The system automatically change to a another frequency in the presence of radio interference.
Eco power management system. Save on batteries.
It can receive and display via LED 1 and LED 2, signals coming from the machine control system (relay action feedback).
Mushrooms type EMO button.
Wireless pairing procedure using the keyboard pushbuttons.
Do you need help?

Looking for a non-standard product?
