Proportional Control Box 24 V 2 Joysticks + Finger Controller + Monoblock 50 l/min 4 Sections 13GPM
Max flow: 50 l/min (13GPM)
Solenoids: 24VDC
Finger Controller
- Share this:
- Secured Payment
- Fast Delivery
- 24/7 Tech Support
Proportional Control Box 24 V 2 Joysticks + Finger Controller + Monoblock 50 l/min 4 Sections 13GPM
Max flow: 50 l/min (13GPM)
Solenoids: 24VDC
Finger Controller
Informations
Hydraulic Valve 4 Spool 50 l/min 12VDC
All three-position sliders on a spring, i.e. they return by themselves to the neutral position when the power supply is cut.
Slider principle:
Position 1 neutral (power supply cut off) cylinder piston rod stalls - oil goes to overflow.
Position 2 operational (power supply to solenoid one only) cylinder piston rod extends.
Position 3 operating (power supply to solenoid two only) cylinder piston rod retracts.
Internal threads in the body:
Connection port supply: 1/2''
Connection port return: 1/2''
Connection port sections : 3/8''
Pressure range:
Maximum supply pressure: 250 Bar (3625.94 psi)
Maximum pressure on return: 50 Bar (725.19 psi)
Maximum pressure on sections: 300 Bar (4351.13 psi)
The opening pressure of the bypass valve increases proportionally with increasing flow rate:
180 bar (2610.68 psi) at 10 l/min
190 bar (2755.72 psi) at 20 l/min
200 bar (2900.75 psi) at 30 l/min
210 bar (3045.79 psi) at 40 l/min
It is recommended to check and set the correct pressure before commissioning.
Self-adjustable, full rotation 30 Bar (435.11 psi change).
Temperature range and oil type:
Permissible ambient temperature: -40°C to 60°C
Permissible oil temperature: -15°C to 80°C
Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46
Recommended oil filtration of 10 - 15 µ
Open centre system (pump-to-tank flow)
Modification / Spools with 1 to 7
HIGH QUALITY Made in EU
The Badestnost Z50 A ES3 24VDC G is a 4-section hydraulic distributor, typically used in hydraulic systems for controlling the flow of hydraulic fluid between different components.
The hydraulic valve is widely used in hydraulic systems in construction, industry and agriculture.
The valve is adapted to various types of machines such as:
sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, agricultural machines, tractors, industrial machines and other hydraulically operated equipment.
Here are some potential applications:
Heavy Machinery: It can be used in various types of heavy machinery, like excavators, loaders, and cranes. These machines require precise control over hydraulic fluid to operate their various components effectively.
Industrial Equipment: In manufacturing or production environments, hydraulic distributors are often used to control automated machinery and hydraulic presses.
Agricultural Machinery: It could be used in various types of farming machinery such as tractors, harvesters, and plows.
Mobile Hydraulics: In vehicles and equipment that require hydraulic operations, this distributor could be a suitable component. It includes dump trucks, garbage trucks, aerial lifts, and more.
Marine Applications: They can also be found in marine applications such as steering systems and on-board equipment on ships.
Box with proportional finger manipulator (full speed control adjustment in real time)
Box size: 200mm x 90 mm x 120 mm 7.87'' x 3.54'' x 4.72''
Cable length: from box to valve connector DIN - 5 meters / 16.4ft
https://www.hydraulic-master.com/pressure-sleeve-12-bspp-for-p40z50-power-beyond.html
The Powerbeyond sleeve is a device that allows an additional manifold to be connected by using a pressure transfer port.
This solution provides power to another valve from a normally closed port allowing high pressure to be transmitted.
To use this function, it is necessary to remove the plug from the pressure transfer port and screw the pressure transfer sleeve in place.
Volume discounts
Quantity | Unit discount | You Save |
---|---|---|
5 | 4% | 310 $ |
10 | 8% | 1,240 $ |
20 | 15% | 4,650 $ |
Do you need help?

Looking for a non-standard product?
