Galtech 2 Section Directional Control Valve Q45 60 l/min 16 GPM Electric solenoid 12V + levers

Valve controled electrically and by additional lever.

The levers on the spring that helps back to the vertical position

Perfect for machines and vehicles which require the ability to control distributor of two places: electrically from the cabin and levers standing directly on the valve, as for example. HDS-edged and cranes.

Lever three positions:

Position the first neutral (lever positioned vertically piston cylinder stands - oil goes to overflow

Position the second working (lever set to slant forward) piston cylinder extends.

Position the third working (lever set to slant backward) piston cylinder retracts.

Internal threads in the body:

Connection port supply: 1/2'' BSP

Connection port return: 1/2'' BSP

Section connection ports : 1/2'' BSP

An overflow valve:

Factory set at 175 Bar = 2538 psi

The possibility of self-regulation, a full rotation change of 30 Bar = 435 psi.

Pressure range:

Maximum supply pressure: 250 Bar = 3626 psi

Maximum pressure on return: 50 Bar = 725 psi

Maximum pressure on sections: 300 Bar = 4351 psi

Bypass valve factory set at 175 Bar = 2538 psi

Self-adjustable, full turn change of 30 Bar = 435 psi.

Temperature range and oil type:

Permissible ambient temperature: -40°C to +60°C

Permissible oil temperature: -15°C to +80°C

Recommended hydraulic oil on mineral oil basis e.g. HL 32 or HL 46

Recommended oil filtration of 10 - 15 µ

It is widely used in hydraulic systems in construction, agriculture and industry.

The distributor is adapted to various types of machines such as: agricultural machines, tractors,

sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers,

industrial machinery and other hydraulically operated equipment.

Ideally suited for machines and vehicles where the ability to control the distributor is required

from two places, e.g. electrically from the cab and with levers while standing directly at the distributor,

This is the case, for example, with HDS and cranes.

HIGH QUALITY Made in Europe !

Cylinder Spool type, for request we can build valve with ''D spool'' motor type.

The Powerbeyond bushing is a device that allows the activation of an additional flow-limited valve downstream of another valve, by changing the function of the 'T' port to a pressure port. This solution provides power to the downstream valve from the port normally intended for the 'tank', allowing the transfer of high pressure. To use this functionality, it is also necessary to remove the cap from the top of the valve block, allowing it to be used as a reservoir connection.