Max flow: 60 l/min (16GPM) 

Solenoids: 12VDC

HIGH QUALITY Made in EU

Adjustable relief valve (one turn 360 degrees is 35 bar = 508psi (factory set 175 bar = 2538psi)

BSP type Screw Power and Back 1/2''  Output 3/8''

Max operating pressure P = 3600psi (250 bar); T = 150psi (10 bar); A , B = 4300psi (300 bar)

OPERATING PRINCIPLE OF THE DISTRIBUTOR:

The CETOP has one starting section and two working sections. The starter or relieving section

 is indispensable, its purpose being to relieve the load on the pump when no distributor is being controlled.

No directional control valve will operate if there is no current flow to the start section.

the electrical connection must be configured in such a way that any electrical signal sent to the

working sections must also reach the starting section.

Operating principle of the starter section slide switch:

Position 1 relieving (current supply cut off) all oil from the pump goes to the overflow.

Position 2 operating (current supply open) all oil from the pump goes to the working sections.

Working section slide rule:

Neutral position 1 (current inlet cut off) cylinder piston rod stands - oil goes to overflow.

Position 2 working (current flow to solenoid one only) cylinder piston rod extends.

Position 3 operational (power supply to coil two only) cylinder piston rod retracts.

It has a wide range of applications in hydraulic systems in agriculture, horticulture, forestry, construction and wider industry.

The distributor is suitable for various types of machinery such as: agricultural machines, tractors, sprayers, aurochs, cyclops, HDS loaders, construction

machines, loaders, excavators, sweepers, industrial machines and other equipment with a hydraulic system.