Characteristics of products:

4 positions joystick 5 buttons: 

- power supply cable: 2m

- joystick to valve : 8m

- red button for lamp or other equipment

- distance between whole of joystick is length 70mm

- additional bypass autput (working in the smae time as sections activated)

Proportional control panel: 

The controller to operate one proportional coil allows for smooth regulation of the valve and adjusting the control to the needs resulting from the application.

Parameters editable in the controller:
- P1, resolution of the proportional valve opening value change (1, 2, 5 or 10 divisions)

- P2, minimum regulation current expressed as a percentage (range 2% - 88%, resolution 1%)

- P3, the maximum control current expressed as a percentage (range 12% - 98%, resolution 1%)

- P4, the starting ramp (soft start) expressed in seconds (range 0 - 9.9 sec. Resolution 0.1 sec.)

- P5, soft stop ramp expressed in seconds (range 0 - 9.9 sec. Resolution 0.1 sec.)

- P6, PWM frequency expressed in hertz (range 60 - 250 Hz, resolution 10 Hz)

Hydraulic valve CETOP 4 Position:

- Monoblock Cetop 3 with A-B ports on side 3/8 BSP, P-T REAR 1/2" BSP with optional venting valve

 * Aluminium, 50-215 bar, with relief valve, mounting positions: 04 * Hex head screw

- Series solenoid operated directional control valve:

 * Max. flow rate: 60 l/min

 * Operating pressure (MPa): A, B, P oil ports 31.5

 * Valve body (Material) surface treatment: casting phosphating surface

- Series pilot controller modular check valve:

 * Size: 6 * Operating pressure (MPa): 31.5

 * Flow rate: 50 l/min

 * Fluid temperature range: -30～80℃

- Series double throttle check valves:

 * Operating pressure (MPa): 31.5 * Flow rate: 50 l/min

 * Fluid temperature range: -30～80℃