VALVE 8 SECTIONS: 

Standard working conditions: 

Max inlet flow : 50l/min 

Max imput pressure : 350 bar 

Max back pressure (T line) : 20 bar 

Operating temperature range: -20°C / +80° C 

Kinematic viscosity range : 10-300 Cst

Port dimensions:

Tank port T : G 1/2 

Inlet port P: G 1/2 

Service ports A1-A8 B1-B8: G 1/2 

Drain port D : G 1/4 

Proportional pressure reducting valve :

Supply Voltage: 12VDC (24VDC also available)

Connector type: AMP JPT 

PWM Frequency : 100Hz 

Remote Radio Control Scanreco:
-1–8 linear levers or 1–4 joysticks. » Various toggle switches, pushbuttons and rotary switches.

- Operator feedback by:
- LEDs (light emitting diodes)
- Monochrome display 2.5" with 128 x64 px
- Stop function in accordance with EN ISO 13849-1 cat. 3, PL d.
- Cable control: Standard length 10 meters / ~33 ft
- Frequency bands: 433–434, 902–928 MHz & 2.4 GHz (other frequencies available on request).
- Operating range >100m / >
~330 ft.
» Operational temperature: –20°C to +70°C
/ ~–4°F to +160°F.
- Protection category: IP65. » Dimensions: (WxHxD): 350 x160 x190 mm / ~13.78 x6.30 x7.48 in (w/o color display).
» Weight: 1.9–2.6 kg / ~4.2–5.7 lbs. including battery

Technical Specifications: 

Power Supply Voltage : 10Vdc -30Vdc 

Max current absorpion : 200mA ON/OFF output load 

Wroking Temperature Range : -40°C + 70°C

Thumbwhell and analog input signals : 0.5 4,5 V

Abakig Uboyts Unoedabce: 11kOhm towards 2.5V

Max ON/OFF autput current 700mA

Push button power supply voltage: 5 VVdc stabilized, max 30 mA, schort circuit protected

Infress Protection Rating : IP65

Connections: Molex minifit Jr 4p. (CAN and supply) + 10p. (aux inputs) 

Technical Specifications:

Power Supply Voltage : 10Vdc÷30Vdc (inner 5x20 8A fuse type F8A)

Current absorpion : 300mA + load outputs (max 7.5A)

Wroking Temperature Range : -20 ÷+ 70 C

Supply for external poterntiometers: +5V - max current 50mA

PWM minimum current range : from 100 to 2500 mA

PweM maximum current range: from 100 to 2500mA

PWM frequency : 50-60-70-85-100-125-150-200-250-300 Hz

Analog inputs impedance: 11 KOhm towards 2.5V

Overlall dimensions with connector mounted: 256x210x45mm

Drill interasis : 242x142mm (n. 4 holes of 6mm diameter)