Previous
Next
Control Cable ÖLFLEX® CLASSIC 110, PVC, U0/U 300/500V, LAPP
1 $
Product ID: 1093
Number of Cores
Protective Conductor
Cross-section
A VDE-registered oil-resistant PVC flexible control cable for a wide range of applications.
The quantity you order = square meters of cable.
Length conversion:
1m2 (square meter) = 10,76ft2 (square foot) = 1'550in2 (square inch)
We require a specific minimal quantity for each cable variant as to make it affordable for us to provide these products to our customers.
You can check it by choosing the configuration you need and setting the quantity to '1' and clicking 'Enter'. It will set itself to required amount.
- Share this:
- Secured Payment
- Fast Delivery
- 24/7 Tech Support
Control Cable ÖLFLEX® CLASSIC 110, PVC, U0/U 300/500V, LAPP
1 $
Number of Cores
Protective Conductor
Cross-section
A VDE-registered oil-resistant PVC flexible control cable for a wide range of applications.
The quantity you order = square meters of cable.
Length conversion:
1m2 (square meter) = 10,76ft2 (square foot) = 1'550in2 (square inch)
We require a specific minimal quantity for each cable variant as to make it affordable for us to provide these products to our customers.
You can check it by choosing the configuration you need and setting the quantity to '1' and clicking 'Enter'. It will set itself to required amount.
Informations
It has universal use in wiring control circuits inside machines and between plants. The cable design allows flexible, continuous bending in moving machine parts and chain guides. The cable design is also suitable for torsional applications in wind turbines.
Retains flexibiity at temperatures down to -15 degree Celsius.
The PVC outer jacket is resistant to acids and alkalis.
Available in many different variants - with variable number of cores, varying cross-section width and both with and without protective conductor. Individual cores are numbered.
Product features
- Flame-retardant according IEC 60332-1-2
- Good chemical resistance, see catalogue appendix T1
- Oil-resistant according to DIN EN 50290-2-22 (TM54)
Norm references / Approvals
VDE reg. no. 7030 for the following sizes:
- up to 2.5 mm²: 2 - 65 cores
- from 4 mm²: 2 - 7 cores
- from 25 mm²: 2 - 5 cores
Product Make-up
- Fine-wire strand made of bare copper wires
- PVC insulation LAPP P8/1
- Cores twisted in layers
- PVC outer sheath, grey (similar RAL 7001)
Technical Data
Classification ETIM 5:
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
Classification ETIM 6:
- ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable
Core identification code: Black with white numbers acc. to VDE 0293-334
Conductor stranding: Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5
Torsion movement in WTG: TW-0 & TW-1, refer to Appendix T0
Minimum bending radius:
- Occasional flexing: 10 x outer diameter
- In power chains: 15 x outer diameter
- Fixed installation: 4 x outer diameter
Nominal voltage: U0/U: 300/500 V
Test voltage: 4000 V
Protective conductor: GN-YE protective conductor
- Marked with G = with protective conductor
- Marked with X = without protective conductor
Temperature range:
- Occasional flexing: -15°C to +70°C
- In power chains: -5°C to +70°C
- Fixed installation: -40°C to +80°C
Do you need help?
Looking for a non-standard product?
We are able to prepare a customized solution especially for you.
Looking for a non-standard product?
We are able to prepare a customized solution especially for you.
