Hydraulic valve 6 spool 80 l/min 24VDC

All three-position sliders on a spring, i.e. they return to the neutral position by themselves when the power supply is cut off.

Slider principle:

Position 1 neutral (power supply cut off) cylinder piston rod stalls - oil goes to overflow.

Position 2 operational (power supply to solenoid one only) cylinder piston rod extends.

Position 3 operating (power supply to solenoid two only) cylinder piston rod retracts.

Internal threads in the body:

Connection port supply: 1/2''

Connection port return: 3/4''

Connection port sections: 1/2''

Pressure range:

Maximum supply pressure: 250Bar (3625,94 psi)

Maximum pressure on return: 50Bar (725,19 psi)

Maximum pressure on sections: 300Bar (4351,13 psi)

The opening pressure of the bypass valve increases proportionally with increasing flow rate:

180 bar (2610,68 psi) at 20 l/min

190 bar (2755,72 psi) at 40 l/min

200 bar (2900,75 psi) at 60 l/min

210 bar (3045,79 psi) at 80 l/min

It is recommended to check and set the correct pressure before commissioning.

Self-adjustable, full rotation 30Bar (435,11 psi change).

Temperature range and oil type: 

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C

Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46

Recommended oil filtration of 10 - 15 µ

Open centre system (pump-to-tank flow)

Modification / Spools with 1 to 7

HIGH QUALITY Made in EU

The hydraulic valve is widely used in hydraulic systems in construction, industry and agriculture.

The valve is adapted to various types of machines such as: 

sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, agricultural machines, tractors, industrial machines and other hydraulically operated equipment.

Can be used with MF, CASE, Caterpillar, Komatsu, Volvo, JCB, Liebherr, Hyundai, Bobcat, Kawasaki, John Deere..... and many more.

Control panel : 

The enclosure is complete and ready to use. It has all the necessary electrical connections and outputs.

Equipped with three joysticks, a safety switch, two power sockets, an output for a distributor and all necessary electronics and fuses. 

Additional accessories included:

power cable, socket and mounting bracket, 5 m cable, and all necessary plugs.

Each joystick has 4 unstable (working) positions and one stable (neutral centre position).

Monostable design where the joystick lever returns to the centre - neutral position by itself.

Features rubber sealing cover for dust, water and oil resistance.

Box dimensions:

23,4cm x 9,6cm x 8,1cm (+7,7 cm joystick)

9,21 '' x 3,78'' x 3,19 '' (+ 3,03 '' joystick)

Lever material: Steel

Housing material: aluminium

The way each joystick works: Monostable (on spring)

Operating temperature: od -25 do 55°C

Leakage class: IP54

Certificates: CE

Recommended supply current: 10A - 12V DC 

(It is possible to power the panel with 24V DC, but in this case the power LED will not be lit).

Construction:

The Powerbeyond sleeve is a device that allows an additional manifold to be connected by using a pressure transfer port.

This solution provides power to another valve from a normally closed port allowing high pressure to be transmitted.

To use this function, it is necessary to remove the plug from the pressure transfer port and screw the pressure transfer sleeve in place.