FIP-M is a sensor and digital device able to signal when inclination exceeds one or more predefined thresholds, along two axes, respect to the horizontal plane. Device is equipped with two independent digital outputs.

Possible connections:

Working:

A red LED helps to give information about the FIP-M inclination with regard to one of two outputs and its configuration:

- OFF: horizontal position (to less than +/- 1°)

- Blinking: inclination doesn't exceed any threshold, but inclinometer is not perfectly horizontal.

- ON: inclination exceeds one or more predefined thresholds

On request, it is possible to specified a delay on the status change of each output.

Settings:

Each sensor is pre-calibrated in FABER-COM to ensure that the electrical zero corresponds with the zero of the bubble level mounted on the top. Press on the device, compressing the springs, to verify that the device works correctly. At power on device gives immediately the information about planarity.

Warning: On request the inclination sensor can be supplied with the matching M12 female 5 way connector.

Axis definition:

Technical specifications:

Size: