Hydraulic valve for levers 3 section 80l/min (21gpm) double acting with 1 swimming section and joystick. 

Control of single-sided and double-sided cylinders.

Three-position lever on the spring, that is, it returns to vertical by itself:

Position 1 neutral (lever set vertically) the piston rod of the cylinder stands - the oil goes to the overflow.

Position 2 working (lever set diagonally forward) the piston rod of the cylinder extends.

Working position 3 (lever set in diagonal backward position) the piston rod of the cylinder retracts.

Joystick five-position on the spring that is, it returns to vertical by itself:

Position 1 neutral (lever set to vertical) piston rods of cylinders stand - oil goes to overflow.

Position 2 working (lever set forward) the piston rod of the first cylinder extends.

Working position 3 (lever set in reverse position) piston rod of the first cylinder retracts.

Working position 4 (lever set in left position) the piston rod of the second cylinder extends.

Working position 5 (lever set in right position) piston rod of the second cylinder retracts.

Internal threads in the body:

Connection port supply: 1/2'' BSP

Connection port return : 3/4'' BSP

Section connection ports : 1/2'' BSP

Pressure range:

Maximum supply pressure: 250Bar (3625,94 psi)

Maximum pressure on return: 50Bar (725,19 psi)

Maximum pressure on sections: 300Bar (4351,13 psi)

It is recommended to check and set the correct pressure before commissioning.

Self-adjustable, full rotation 30Bar (435,11 psi change).

Temperature range and oil type: 

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C

Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46

Recommended oil filtration of 10 - 15 µ

Open centre system (pump-to-tank flow)

Modification / Spools with 1 to 7

HIGH QUALITY Made in EU

The hydraulic valve is widely used in hydraulic systems in construction, industry and agriculture.

The valve is adapted to various types of machines such as: sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, agricultural machines, tractors, industrial machines and other hydraulically operated equipment.

Can be used with MF, CASE, Caterpillar, Komatsu, Volvo, JCB, Liebherr, Hyundai, Bobcat, Kawasaki, John Deere..... and many more.

Dimensions:

The Powerbeyond sleeve is a device that allows an additional manifold to be connected by using a pressure transfer port.

This solution provides power to another valve from a normally closed port allowing high pressure to be transmitted.

To use this function, it is necessary to remove the plug from the pressure transfer port and screw the pressure transfer sleeve in place.