Monoblock directional control valve 80 l/min (21gpm) 4 spool double action. 

All sliders on the three-position sections are spring-loaded, meaning they return to the neutral position by themselves.

Maximum flow: up to 80L/min (21.13 gal/min)

Internal threads in the body:

- Connection port supply: 1/2'' BSP

- Connection port return: 3/4'' BSP

- Connection port sections: 1/2'' BSP

Cable connections:

- Internal thread of tube: M16x1.5

- Slide end internal thread: M6x1.5

Pressure range: 

Maximum supply pressure: 250 Bar (3625.94 psi)

Maximum pressure on return: 50 Bar (725.1p psi)

Maximum pressure on sections: 300 Bar (4351.13 psi)

Temperature range and oil type: 

Permissible ambient temperature: -40°C to +60°C

Permissible oil temperature: -15°C to +80°C

Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46

The hydraulic valve is suitable for various types of machinery such as: agricultural machines, tractors, sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically operated equipment.

It is used wherever, for reasons of safety, better control comfort and the need for cleanliness, it is required to mount the distributor outside the cab. Only the control unit, e.g. the joystick, remains in the cab. 

HIGH QUALITY Made in EU

The Powerbeyond sleeve is a device that allows an additional manifold to be connected by using a pressure transfer port.

This solution provides power to another valve from a normally closed port allowing high pressure to be transmitted.

To use this function, it is necessary to remove the plug from the pressure transfer port and screw the pressure transfer sleeve in place.