Previous
Next
Proportional Valve Cetop NG6 80 l/min with Scanreco G2B Up to 24 Functions
5,500 $
Product ID: 1065
Hydraulic Valve Cetop Ng 6 and Scanreco G2B Mini/Maxi 6 or 8 pads and 2 or 3 joysticks.
We can set up any configuration if you need more than 6 or 8 radio controlled functions. If you need more than that standard functions then we can offer a solution that allows you to control up to 24 proportional functions with one radio set! We can do 9, 12, 14, 15, 18, 22 or any other configuration up to 24 proportional functions. We can configure this with one Cetop valve with more sections or we can offer Cetop valves connected in series.
Examples are provided here. For a detailed quote and configurations, please contact us.
This valve is configured for advanced machines. If you need a dedicated configuration, we can tailor it to your needs, including changes in spools, tension, number and types of sections, anti-shock valves, connectors, etc. The relief valve can also be adjusted as required. Spool type and flow can be individually selected to suit your application. Please send us a diagram, and we can assist further.
We provide technical support and are readily available via email, whatsup and telephone.
Feel free to contact us at [email protected] or [email protected] for any inquiries or assistance.
After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.
- Share this:
- Secured Payment
- Fast Delivery
- 24/7 Tech Support
Proportional Valve Cetop NG6 80 l/min with Scanreco G2B Up to 24 Functions
5,500 $
Hydraulic Valve Cetop Ng 6 and Scanreco G2B Mini/Maxi 6 or 8 pads and 2 or 3 joysticks.
We can set up any configuration if you need more than 6 or 8 radio controlled functions. If you need more than that standard functions then we can offer a solution that allows you to control up to 24 proportional functions with one radio set! We can do 9, 12, 14, 15, 18, 22 or any other configuration up to 24 proportional functions. We can configure this with one Cetop valve with more sections or we can offer Cetop valves connected in series.
Examples are provided here. For a detailed quote and configurations, please contact us.
This valve is configured for advanced machines. If you need a dedicated configuration, we can tailor it to your needs, including changes in spools, tension, number and types of sections, anti-shock valves, connectors, etc. The relief valve can also be adjusted as required. Spool type and flow can be individually selected to suit your application. Please send us a diagram, and we can assist further.
We provide technical support and are readily available via email, whatsup and telephone.
Feel free to contact us at [email protected] or [email protected] for any inquiries or assistance.
After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.
Informations
Hydraulic, sectional and proportional AL-6 Valve CETOP 3 (NG6) 6 functions
Technical specifications of default configuration:
Maximum working pressure (bar): Ports P, A, B: 315 bar; Port T: 100 bar
Maximum working flow (l/min): 80
Working fluid: Mineral oil, phosphete-ester
Fluid temp (°C): -20 - +70
Viscosity (mm2): 2,8 - 100
Insulation grade: IP65
Oil cleanliness: NAS1638 class 9 / ISO4406 class 20/18/15
-------------------------------------------------------------------------------------------------------------------------------
Scanreco G2B Mini with 6 levers
- 1-6 linear levers
- Stop function according to EN ISO 13849-1 Cat. 3, PL e
- Various toggle switches, buttons and rotary switches
- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
- Operating range > 100 m / > ~330 ft.
- Degree of protection: IP65
- Operating temperature: -20°C to +70°C / ~-4°F to +160°F
- Cable control: standard length 10 meters / ~33 ft.
- G2B Receiver PWM 12 or 24 VDC power supply
- Choice of radio or cable control
- 8 bi-directional proportional outputs
- All analog outputs are programmable for final setting of speeds
- 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output)
- A DV output to control the dump valve
- Radio communication in the ISM band using frequency hopping technology
- Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available).
- Programmable logic with block, soak, decelerate, ramp functions and much more
- Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required.
- Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display)
.jpg)
-------------------------------------------------------------------------------------------------------------------------------
Scanreco G2B Maxi with 8 levers
- 1-8 linear levers
- Stop function according to EN ISO 13849-1 Cat. 3, PL e
- Various toggle switches, buttons and rotary switches
- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
- Operating range > 100 m / > ~330 ft.
- Degree of protection: IP65
- Operating temperature: -20°C to +70°C / ~-4°F to +160°F
- Cable control: standard length 10 meters / ~33 ft.
- G2B Receiver PWM 12 or 24 VDC power supply
- Choice of radio or cable control
- 8 bi-directional proportional outputs
- All analog outputs are programmable for final setting of speeds
- 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output)
- A DV output to control the dump valve
- Radio communication in the ISM band using frequency hopping technology
- Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available).
- Programmable logic with block, soak, decelerate, ramp functions and much more
- Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required.
- Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display)
-------------------------------------------------------------------------------------------------------------------------------
Scanreco G2B Maxi with 2 Joysticks
- 2 three-axis joysticks
- Stop function according to EN ISO 13849-1 Cat. 3, PL e
- Various toggle switches, buttons and rotary switches
- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
- Operating range > 100 m / > ~330 ft.
- Degree of protection: IP65
- Operating temperature: -20°C to +70°C / ~-4°F to +160°F
- Cable control: standard length 10 meters / ~33 ft.
- G2B Receiver PWM 12 or 24 VDC power supply
- Choice of radio or cable control
- 8 bi-directional proportional outputs
- All analog outputs are programmable for final setting of speeds
- 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output)
- A DV output to control the dump valve
- Radio communication in the ISM band using frequency hopping technology
- Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available).
- Programmable logic with block, soak, decelerate, ramp functions and much more
- Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required.
- Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display)
The kit works with a lot of application. For sure please contact with us.
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 5 | 4% | 1,100 $ |
| 10 | 8% | 4,400 $ |
| 20 | 15% | 16,500 $ |
Do you need help?
Looking for a non-standard product?
We are able to prepare a customized solution especially for you.
Looking for a non-standard product?
We are able to prepare a customized solution especially for you.