Electromagnet technical features:

Valve type GALTECH Q45
Magnet connection Type DIN 43650 (vers. A)
Protection type IP65
Coil insulation class H Supply voltage 12V D.C.
Maximum voltage tolerance ±10%
Absorbed power supply 58W
Maximum utilization ratio 100%
Directional control valve characteristics (60 l/min)
Max. working pressure 275 bar (3988 PSI)
Max. back outlet pressure 25 bar (3363 PSI)
Emergency operation or in case of power failure With lever
Max. spool leakage of A and B ports to T port at 1450 PSI with viscosity 35 mm2/s 5 cm3/min

Slider: 103 cylinder
Flow [l / min]: 60
Max pressure [bar]: 350
Overflow [bar]: 150
Power connection [BSP]: 3/8 ”
Receiver connection [BSP]: 1/2 "

Tank connection [BSP]: 1/2 "

  + 

Scanreco RC400 Radio Remote Control Systems

Extremely easy to use, safe, fast and precise; its electronic core, based on advanced microprocessor technology, is highly configurable. With this kit you can control crane

Typically require 4 functions

Transmitter (Hand set) - Horn

Stop/Start - RPM +/- Function
Pilot Valve (up to 70ltr/min)
Full Wiring Kit
2 x Batteries & Charger Unit
Full Handbook Instructions

Parameters of the proportional controller:

Maximum pressure: 210 bar

Flow: 50 l / min

Oil temperature: -20 ° C to 70 ° C

Maximum flow connection 1: 60 l / min

Connections: G1 / 2 "Oil viscosity: 15 ÷ 380 mm2 / s

Coil: rated voltage: 24V;

Rated Current: 1.24A; Resistance: 7.2 ohms