Directional control valve 4-spool Galtech 60 l/min 16 gpm. 

Valve type Q45 60 l/min

Magnet connection Type DIN 43650 (vers. A)

Ingress Protection type IP65

Coil insulation class H

Supply voltage 12VDC.

Maximum voltage tolerance ±10%

Absorbed power supply 58W

Maximum utilization ratio 100%

Directional  control valve characteristics Portata

Max. flow  60l/min 16GPM

Max. working pressure 275 bar - 3989psi

Max. back outlet pressure 25 bar - 363psi

Emergency operation or in case of power failure -Push type

Max. spool leakage of A and B ports to T port at 100 

It is widely used in hydraulic systems in construction, agriculture and industry.

The valve is adapted to various types of machines such as: agricultural machines, tractors, sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machinery and other hydraulically operated equipment.

Ideally suited for machines and vehicles where it is required to be able to control the distributor from two places, e.g. electrically from the cab and with levers while standing directly at the distributor, this is the case, for example, with HDS and cranes.

Cylinder Spool type, for request we can build valve with ''D spool'' motor type.

The Powerbeyond bushing is a device that allows the activation of an additional flow-limited valve downstream of another valve, by changing the function of the 'T' port to a pressure port. This solution provides power to the downstream valve from the port normally intended for the 'tank', allowing the transfer of high pressure. To use this functionality, it is also necessary to remove the cap from the top of the valve block, allowing it to be used as a reservoir connection.