Hydraulic valve kit with joystick 3 function double acting for Ford loader  40l/min 11GPM 12V

Single- and double-sided cylinder control.

Slider principle:

Three-position lever on spring, i.e. it returns to vertical by itself.

Neutral position one (lever set to vertical) cylinder piston rod stands - oil goes to overflow.

Working position two (lever angled forward) cylinder piston rod extends.

Third operating position (lever set in diagonal to rear) cylinder piston rod retracts.

Internal threads in the body:

Connection port supply: 1/2''

Connection port return: 1/2''

Connection port sections : 3/8''

Pressure range:

Maximum supply pressure: 250 Bar (3625.94 psi)

Maximum pressure on return: 50 Bar (725.19 psi)

Maximum pressure on sections: 300 Bar (4351.13 psi)

The opening pressure of the bypass valve increases proportionally with increasing flow rate:

180 bar (2610.68 psi) at 10 l/min

190 bar (2755.72 psi) at 20 l/min

200 bar (2900.75 psi) at 30 l/min

210 bar (3045.79 psi) at 40 l/min

It is recommended to check and set the correct pressure before commissioning.

Self-adjustable, full rotation 30 Bar (435.11 psi change).

Temperature range and oil type: 

Permissible ambient temperature: -40°C to +60°C

Permissible oil temperature: -15°C to +80°C

Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46

Recommended oil filtration of 10 - 15 µ

Open centre system (pump-to-tank flow)

Modification / Spools with 1 to 7

HIGH QUALITY Made in EU

The hydraulic valve is widely used in hydraulic systems in construction, industry and agriculture.

The valve is adapted to various types of machines such as: 

sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, agricultural machines, tractors, industrial machines and other hydraulically operated equipment.

Can be used with MF, CASE, Caterpillar, Komatsu, Volvo, JCB, Liebherr, Hyundai, Bobcat, Kawasaki, John Deere..... and many more.

Scheme:

Solenoid directional control valve :

• Ambient Temperature Range: -30°C to +50°C
• Hydraulic Fluid: Mineral oil-based/hydraulic oil
• Fluid Temperature Range: -20°C to +70°C
• Nominal Flow: 50 l/min
• Max Operating Pressure:
  • With Load (L): 315 bar
  • Without Load: 210 bar
• Viscosity and Filtration:
  • Viscosity: 15-380 mm²/s
  • Filtration: Up to NAS 1638 class 9
• Supply Voltage: 12V DC
• Power Consumption: 36W; 29W
• Switching Frequency: 15,000 cycles per hour
• Coil Temperature: Up to 180°C

Joystick with 1 push-button:

• Maximum Cable Stroke: 14+14 mm
• Lever Ratio: 6.5:1
• Movement Type: Cross-type
• Cable Type: Standard
• Safety Feature: Lateral safety lock
• Operating Temperature Range: -30°C to +80°C
• Lubrication: Molikote G72

Cable for Joystick: 

• Maximum Cable Stroke: 30±2 mm
• Disconnection Loads:
  • Wire Rope Terminal: 3000 N
  • Conduit Terminal: 3000 N
• Minimum Bending Radius: 200 mm
• Operating Temperature Range: -30°C to +80°C
• Ball Material Options: Choice of metal or plastic

We also have other line lengths available if you need it. Please let us know.

• 1.0 meter: 39.37 inches
• 1.5 meters: 59.06 inches
• 2.5 meters: 98.4 inches
• 3.0 meters: 118.11 inches
  
  

The Powerbeyond sleeve is a device that allows an additional manifold to be connected by using a pressure transfer port.

This solution provides power to another valve from a normally closed port allowing high pressure to be transmitted.

To use this function, it is necessary to remove the plug from the pressure transfer port and screw the pressure transfer sleeve in place.