Hydraulic Valve  3 Functions 80 L/Min

Three-position lever on the spring, that is, it returns to vertical by itself:

Position 1 neutral (lever set vertically) the piston rod of the cylinder stands - the oil goes to the overflow.

Position 2 working (lever set diagonally forward) the piston rod of the cylinder extends.

Working position 3 (lever set in diagonal backward position) the piston rod of the cylinder retracts.

The five-position joystick on the spring means it returns to the vertical position by itself:

Position 1 neutral (lever set vertically) cylinder piston rods stand - oil goes to overflow.

Position 2 working (lever set forward) the piston rod of the first cylinder extends.

Working position 3 (lever set in reverse position) piston rod of the first cylinder retracts.

Working position 4 (lever set in left position) the piston rod of the second cylinder extends.

Working position 5 (lever set in right position) piston rod of the second cylinder retracts.

Maximum flow: up to 80L/min (21,13 gal/min)

Internal threads in the body:

- Connection port supply: 1/2'' BSP

- Connection port return: 3/4'' BSP

- Connection port sections: 1/2'' BSP

Cable connections:

- Internal thread of tube: M16x1.5

- Slide end internal thread: M6x1.5

Pressure range: 

Maximum supply pressure: 250Bar (3625,94 psi)

Maximum pressure on return: 50Bar (725,1p psi)

Maximum pressure on sections: 300Bar (4351,13 psi)

Temperature range and oil type: 

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C

Recommended hydraulic oil on mineral oil basis, e.g. HL 32 or HL 46

The hydraulic valve is suitable for various types of machinery such as: agricultural machines, tractors, sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically operated equipment.

It is used wherever, for reasons of safety, better control comfort and the need for cleanliness, it is required to mount the distributor outside the cab. Only the control unit, e.g. the joystick, remains in the cab. 

HIGH QUALITY Made in EU

Dimensions:

The Powerbeyond sleeve is a device that allows an additional manifold to be connected by using a pressure transfer port.

This solution provides power to another valve from a normally closed port allowing high pressure to be transmitted.

To use this function, it is necessary to remove the plug from the pressure transfer port and screw the pressure transfer sleeve in place.