Scanreco RC400 Radio Remote Control Systems.

The Scanreco RC 400 G2B remote control system has been especially developed for

hydraulically driven mobile cranes and machinery. The system is a digital remote

control system based on an extremely advanced microprocessor technology. Years of

exhaustive and demanding testing have shown that the remote control system can

cope with the roughest of environments.

The system is protected against electromagnetic and radio frequency radiation and

can be installed onto all hydraulic valve types (voltage, current pulse width, or

protocol steered) found on the market.

In its basic form the remote control system is comprised of a portable control unit

with manoeuvre levers for proportional control and switches for ON/OFF functions, a

central unit with connection cable for driving proportional electro-hydraulic slide

controllers.

Digitally coded control information (lever deflection and switch position) is sent from

the portable control unit via radio to the central unit. The portable control unit and

central unit translate the magnitude and direction of the manoeuvre lever deflections

and switch position.

It can be used for six typical proportional functions, e.g.

-Slewing (rotation of crane)

-Main lift

-Jib

-Extension

-Grab open / close

-Rotator

You can also choose a different function as below:

The "Mini" is a compact and versatile transmitter that can be easily adapted to customer requirements.

Thanks to its modular design, the "Mini" can be supplied with either 1 to 6 linear levers or 1 to 3 joysticks and additional buttons and switches.

Despite the compact format, all operating elements are sufficiently large and designed for long and fatigue-free operation.

In addition to standard functions, the transmitter also offers numerous optional settings and functions for optimum operator guidance.

The speed of proportional movements can be set in five stages using a latching switch.

The operator receives feedback from the controlled machine via the display and LEDs.

Automatic frequency management ensures trouble-free operation even in the event of interference from other radio devices in the vicinity.

On-site calibration allows authorized users to adjust system settings without additional tools or software.

The transmitter has an individual identification code and communicates with the receiver via a proprietary protocol.

This ensures that no other transmitters (from Scanreco or other manufacturers) can accidentally activate the machine.

The tamping function complies with performance level "e" (PL e), the highest level according to ISO 13849-1, a legally binding standard for safety-critical control components.

The "G2" receiver is available with proportional and digital outputs as well as a CANopen interface.

Thanks to its numerous interfaces and setting options, the "G2" is suitable for practically all mobile hydraulic applications.

The analog output signals can control voltage and current-controlled hydraulic valve blocks.

Several receivers can be connected together in a master-slave configuration if more functions are required than a single receiver can provide.

The numerous functions of the integrated basic controller support a wide range of performance and functions. The basic controller makes it possible to dispense with numerous external electronic components (PLC, relays, diodes, etc.).

The portable control unit is impact and weather resistant and is light weight and compact. Controls are available for 4, 5, 6, 7 or 8 manoeuvre functions. The manoeuvre levers are fully proportional and have spring return to the zero position, i.e. a "dead-man’s-handle".

The control unit has an emergency stop function which will immediately stop all movement . All manoeuvre levers are protected with a protective frame against unintentional activation and against mechanical damage.

The control unit has multi-step micro-speed operation as standard enabling instantaneous temporary reduction of speed and it can also be equipped with a large number of switches for ON/OFF functions. A LED and sound signal are used to indicate such things as operating and battery status and for a simple and diagnostic fault finding. ( See picture of control unit ).

SD Actuator kit to mount on WALVOIL valve 4 functions 12 V or 24 V

Proportional actuator blocks for direct connection on SD (WALVOIL) hydraulic valves, were born to allow the remote control of a machine, which has these kinds of manual hydraulic valves: each module for HCD-SD that is part of the block can control one proportional function.

The direct installation on the back of the hydraulic valve guarantees the possibility for the user to make a very “precise” mounting, in a “limited” place. In this way risk of any eventual future “mechanical plays” is excluded.

The servo control HC-SD is a block of modular hydraulic pistons, electrically controlled by a couple of proportional valves, with mechanical feedback.

The product has a high reliability thanks to careful engineering and production process carried out with the most advanced technologies.

The installation of this block adds to a manual hydraulic valve the remote control, by cable or by radio.

The specific design made for the direct connection to the back of the valve allows a more precise handling of the machine compared to traditional installations of retrofit modules on the dual control rods.

Assembled banks are available up to 8 functions, without spaces between sections.

Banks are available for the following manufacturers:

* For availability of other models please contact our sales department.

** HCD4 version is available with 6 or 10 mm joint screw thread (to be specified in case of order).

Dimensions of retrofit modules directly installed on the main valve.

Example of connections between hydraulic pump unit and retrofit modules.

Example of connection between counter-pressure block and retrofit modules.

Kit includes: actuator block 4 functions + remote radio: transmitter + receiver + all cables , charger, 2 x batteries

Order time: 3-4 weeks, available versions: 12 V or 24V

For special require we can supply the same kit for 5 functions valve.

This kit is configured for the most popular machine settings, supporting up to 4 standard crane functions. If you require a different dedicated configuration, we can customize it to meet your needs, including variations in voltage, the number of sections, etc. Please send us a diagram, and we can assist further.

The kit is designed for plug-and-play convenience. We handle everything from the plugs to the software configuration.

We provide technical support and are readily available via email, whatsup and telephone.

Feel free to contact us at [email protected] or [email protected] for any inquiries or assistance.

After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.

After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements.